Folks, OK, not sure what the problem is. I've previously (cerca r-16637) built the wrap image and all went well.
I've tried with a more recent svn, but using the same .config from r-16637. Unfortunately, it won't boot. Here's the last few lines during boot: scsi0 : sc1200 scsi1 : sc1200 ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 ata2: DUMMY ata1.00: failed to IDENTIFY (device reports invalid type, err_mask=0x0) Clocksource tsc unstable (delta = -478254592 ns) ata1.00: failed to IDENTIFY (device reports invalid type, err_mask=0x0) block2mtd: error: cannot open device /dev/hda2 PNP: No PS/2 controller found. Probing ports directly. i8042.c: No controller found. mice: PS/2 mouse device common for all mice enabling scx200 high-res timer (1 MHz +0 ppm) TCP westwood registered NET: Registered protocol family 17 Bridge firewalling registered 802.1Q VLAN Support v1.8 Ben Greear <[email protected]> All bugs added by David S. Miller <[email protected]> Using IPI Shortcut mode VFS: Cannot open root device "mtdblock0" or unknown-block(0,0) Please append a correct "root=" boot option; here are the available partitions: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) Pid: 1, comm: swapper Not tainted 2.6.31.5 #1 Call Trace: [<c101f6c7>] ? panic+0x47/0xf0 [<c12bbab0>] ? mount_block_root+0x1d0/0x270 [<c1002930>] ? do_notify_resume+0x3f0/0x910 [<c12bbb97>] ? mount_root+0x47/0x60 [<c12bbce5>] ? prepare_namespace+0x135/0x170 [<c106765f>] ? sys_access+0x1f/0x30 [<c12bb552>] ? kernel_init+0xd2/0xe0 [<c12bb480>] ? kernel_init+0x0/0xe0 [<c1003813>] ? kernel_thread_helper+0x7/0x14 Again, identical configs, last one that boot was 16637, current version 18261. Not sure what happened here. TIA, David A. Bandel -- Focus on the dream, not the competition. - Nemesis Air Racing Team motto Visit my blog at: http://www.pananix.com/cgi-bin/blosxom _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
