On Mon, Nov 2, 2009 at 18:18, Florian Fainelli <flor...@openwrt.org> wrote: > Hi David, > > 2009/11/3, David A. Bandel <david.ban...@gmail.com>: >> On Mon, Nov 2, 2009 at 12:44, Jo-Philipp Wich <x...@subsignal.org> wrote: >>> -----BEGIN PGP SIGNED MESSAGE----- >>> Hash: SHA1 >>> >>> Not sure whether same config is supposed to work. At least the rootfs >>> partition name changed recently, my Wrap Board here works fine with an >>> ext2 image and CONFIG_X86_GRUB_ROOTPART=/dev/sda2 . >> >> OK, tried again -- make distclean, then make package/symlinks (did a >> minimal config), make menuconfig (added packages and I see the >> /dev/sda2 entry vice /dev/hda2), build went well, but I still have: >> >> ata1.00: failed to IDENTIFY (device reports invalid type, err_mask=0x0) >> block2mtd: error: cannot open device /dev/sda2 > > It will not work because of those two lines before. Could you paste > the message that is shown before the "failed to IDENTIFY"? Are you > using some broken medium ?
scsi0 : sc1200 scsi1 : sc1200 ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 ata2: DUMMY ata1.00: failed to IDENTIFY (device reports invalid type, err_mask=0x0) Clocksource tsc unstable (delta = -474635714 ns) ata1.00: failed to IDENTIFY (device reports invalid type, err_mask=0x0) block2mtd: error: cannot open device /dev/sda2 Whether the medium is "broken" or not, I can't say, it's a Sharp 16Mb CF disk that works fine if I load r-16637. Ciao, David A. Bandel -- Focus on the dream, not the competition. - Nemesis Air Racing Team motto Visit my blog at: http://www.pananix.com/cgi-bin/blosxom _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel