Hey,
On Tuesday 20 April 2010 12:51:23 Manuel Lauss wrote:
> Hi Florian,
>
> On Mon, Apr 19, 2010 at 10:54 AM, Florian Fainelli <[email protected]>
wrote:
> >> The lspci output provided by the reporter of ticket 6851, does it look
> >> correct for
> >> MTX-1?
> >
> > No it does not. It should only show a PCI bridge and the devices attached
> > to it, in my case 2 Atheros-based cards.
>
> This matches the description of a bug fixed in August 2006:
> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdi
> ff;h=32136568a9828c27c07eedb8d2b3e3d9fe8d87ba
>
> If you don't come up with anything, I'll dig into this Friday evening.
Can anyone check if the following patch fixes the issue? I will test it tonight
anyway.
diff --git a/arch/mips/alchemy/mtx-1/board_setup.c
b/arch/mips/alchemy/mtx-1/board_setup.c
index a9f0336..c2c29e5 100644
--- a/arch/mips/alchemy/mtx-1/board_setup.c
+++ b/arch/mips/alchemy/mtx-1/board_setup.c
@@ -117,9 +117,9 @@ mtx1_pci_idsel(unsigned int devsel, int assert)
if (assert && devsel != 0)
/* Suppress signal to Cardbus */
- gpio_set_value(1, 0); /* set EXT_IO3 OFF */
+ alchemy_gpio_direction_output(1, 0); /* set EXT_IO3 OFF */
else
- gpio_set_value(1, 1); /* set EXT_IO3 ON */
+ alchemy_gpio_direction_output(1, 1); /* set EXT_IO3 ON */
au_sync_udelay(1);
return 1;
--
Florian
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
