Am 28.07.2010 20:19, schrieb Stefan Monnier: > I'm getting the above error message on a WL-500g, with a firmware > compiled a couple days ago from a fresh checkout of > svn://svn.openwrt.org/openwrt/branches/backfire. > > It seems to be related to > > https://dev.openwrt.org/ticket/6425 > > (and https://dev.openwrt.org/ticket/7059), which claims to be fixed, so > it looks like the fix didn't make it to backfire. Is there a fix for it > for backfire, or should I use the bleeding-edge, instead? > > > Stefan Hi,
#7059 is not a duplicate of #6425. For the brcm47xx target ohci depends on ehci and the other way around, because the ohci driver loads the ehci driver. This was fixed in trunk, but is not tested, because I do not have a device with an USB 2.0 controller directly connected to ssb. If you have such a device it would be nice if you could try the ehci and the ohci driver in trunk and report your results so I could integrate then into backfire. Hauke _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
