> #7059 is not a duplicate of #6425. For the brcm47xx target ohci depends
> on ehci and the other way around, because the ohci driver loads the ehci
> driver. This was fixed in trunk, but is not tested, because I do not
> have a device with an USB 2.0 controller directly connected to ssb. If
> you have such a device it would be nice if you could try the ehci and
> the ohci driver in trunk and report your results so I could integrate
> then into backfire.
The wl-500g is a USB1 device. I can get USB to work in backfire by
loading ehci, but since the port is USB1 only, this is a waste.
Stefan
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
