Hi, there is no way to check the correctness of the image without flashing it. i suggest you buy a serial cable. imho a serial cable is the most valueable asset one can have when playing with embedded hardware
blogic Robert Chan wrote: > Hi all, > > > > Honestly, I had already bricked 2 routers (TP-Link 1043ND and 741ND). What > I did was that I compiled the images from the source, and then upload them > to the routers. Sometimes they work. However, in two of the instances, I > changed some options, and . bricked the routers (even the build and the > flashing were all successful). > > > > I am just wondering, when I try to build the image from the source again in > the future, should I just cross my finger and hope that the image will > work? Or is there any way to verify the correctness of an image before I > flash it to the router? > > > > Thanks very much in advance. > > > > Regards, > > > > Robert > > > > > > > > > ------------------------------------------------------------------------ > > _______________________________________________ > openwrt-devel mailing list > [email protected] > https://lists.openwrt.org/mailman/listinfo/openwrt-devel _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
