Al 27/02/11 14:21, En/na Jonas Gorski ha escrit: > Hi, > > On 26 February 2011 20:20, Luca Olivetti <[email protected]> wrote: >> I'm still trying to make openwrt work on my router (now a lantiq target, >> previously ifxmips) and I just noticed that the switch (an ar8216) doesn't >> pass data between ports, i.e (warning, lousy ASCII art follows): > > Do you configure the switch in your /etc/config/network like in > <https://dev.openwrt.org/browser/trunk/target/linux/ar71xx/base-files/etc/defconfig/tew-632brp/network>?
Nope, it's not configured. How do I configure it manually (i.e. without touching /etc/config/network)? > The ar8216 driver defaults to port isolation if not configured, which > would explain your symptoms. Ok, so what's the command to disable port isolation? (I don't want to to a full vlan setup since I didn't patch the ethernet driver yet to use the ar8216 receive skb function). Bye -- Luca _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
