Hi,
i configured my ASUS WL-500gP.v.2 with Logitech webcam C310
everything works fine and i can get snapshots as well as stream ...
now i want to configure second camera ... Creative VF-0040
the only way i found is to duplicate /etc/config/mjpeg-streamer
and /etc/init.d/mjpeg-streamer
so i have
root@cam001:/etc/config# ls -al
-rw-r--r-- 1 root root 188 Jan 1 02:33 mjpg-streamer
-rw-r--r-- 1 root root 303 Jan 1 02:35 mjpg-streamer1
root@cam001:/etc/config# cat mjpg-streamer
config mjpg-streamer core
option device "/dev/video1"
option resolution "1280x720"
option fps "3"
option port "8080"
option quality "80"
option yuv "on"
option enabled "true"
root@cam001:/etc/config# cat mjpg-streamer1
config mjpg-streamer core
option device "/dev/video0"
option resolution "352x288"
option fps "3"
option port "8081"
option quality "80"
option yuv "on"
option enabled "true"
root@cam001:/etc/init.d# ls -al
-rwxr-xr-x 1 root root 584 May 17 2011 mjpg-streamer
-rwxr-xr-x 1 root root 588 Jan 1 02:28 mjpg-streamer1
root@cam001:/etc/init.d# cat mjpg-streamer
#!/bin/sh /etc/rc.common
# Copyright (C) 2009 OpenWrt.org
START=50
SSD=start-stop-daemon
NAME=mjpg_streamer
PIDF=/var/run/$NAME.pid
PROG=/usr/bin/$NAME
start() {
config_load mjpg-streamer
config_get device core device
config_get resolution core resolution
config_get fps core fps
config_get port core port
config_get_bool enabled core enabled
[ $enabled -gt 0 -a -c $device ] && sleep 3 && $SSD -S -m -p $PIDF -q
-x $PROG -- --input "input_uvc.so --device $device --fps $fps --resolution
$resolution" --output "output_http.so --port $port" &
}
stop() {
$SSD -K -p $PIDF
}
root@cam001:/etc/init.d# cat mjpg-streamer1
#!/bin/sh /etc/rc.common
# Copyright (C) 2009 OpenWrt.org
START=50
SSD=start-stop-daemon
NAME=mjpg_streamer
PIDF=/var/run/$NAME"1".pid
PROG=/usr/bin/$NAME
start() {
config_load mjpg-streamer1
config_get device core device
config_get resolution core resolution
config_get fps core fps
config_get port core port
config_get_bool enabled core enabled
[ $enabled -gt 0 -a -c $device ] && sleep 3 && $SSD -S -m -p $PIDF -q
-x $PROG -- --input "input_uvc.so --device $device --fps $fps --resolution
$resolution" --output "output_http.so --port $port" &
}
stop() {
$SSD -K -p $PIDF
}
so, is there way to configure two cameras in one, the same mjpeg-streamer
configuration file?
--
Zeus V. Panchenko
JID:[email protected] GMT+2 (EET)
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
