Hello Vasileios, On Tuesday 25 October 2011 00:21:11 Vasileios Lakafosis wrote: > Dear OpenWrt Developers, > > this is Vasileios Lakafosis, who, as a member of the Cisco Locator/ID > Separation Protocol team <http://lisp.cisco.com/> at San Jose, has ported > the LISP functionality to OpenWrt. As per the LISP IETF > drafts<http://tools.ietf.org/wg/lisp/>, > the following source code adds basic LISP xTR (Ingress and Egress Tunnel > Router) functionality to OpenWrt-enabled routers providing the OpenWrt users > with a way to access and try out the LISP Beta > Network<http://www.lisp4.net/beta-network/> and > allowing them to benefit from everything LISP can offer, namely IP > portability when changing providers, multi-homing across different > providers, simple ingress traffic engineering without BGP and, soon, rapid > IPv6 transition. > > Enabling LISP into OpenWrt requires the addition of essentially three new > packages; the user space executable "lispd" (lisp_0.1-1_ar71xx.ipk) and the > loadable kernel modules "lisp.ko" (kmod-lisp_mod_2.6.32.27+0.1-1_ar71xx.ipk) > and "lisp_int.ko" (kmod-lisp_int_2.6.32.27+0.1-1_ar71xx.ipk). That being > said and given that no other pre-existing source code has been modified, > you can download the patch file as well as the '.config' (reflecting the > package dependency requirements compared to the original .config) from > here<http://dl.dropbox.com/u/1995269/all_lisp_changes.patch.tar.gz> > .
Can you submit the patches to the mailing-list following the guidelines described here: https://dev.openwrt.org/wiki/SubmittingPatches ? this will make the review easier for the package commiters. Thank you. > > A zipped folder that contains the whole source code of the four packages > (the fourth, namely lispconf, being an extra utility to check the lisp map > cache) can be downloaded from > here<http://dl.dropbox.com/u/1995269/LISP-OpenWrt-source_packages.tar.gz> > . > > Tested on Backfire branch at SVN revision #28461 for target system -> > Atheros AR71xx and for target profile -> WRT160NL (cross-compiled with > toolchain-mips_r2_gcc-4.3.3+cs_uClibc-0.9.30.1). The corresponding > precompiled LISP (openwrt-lisp-ar71xx-wrt160nl-jffs2-factory.bin) image can > be downloaded from > here<http://dl.dropbox.com/u/1995269/openwrt-lisp-ar71xx-wrt160nl-jffs2-fact > ory.bin> . > > Please let me know if there is any other information missing that I can > provide. > > > Thank you, > Vasileios Lakafosis > PhD candidate, Georgia Tech -- Florian _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel