On 2011-12-01 11:54 PM, Marek Lindner wrote: > > Hi, > > when I upgraded my trunk to a fairly recent version (rev. 29333) I noticed > wifi became practically unusable on my AR9285 device. I spend a good deal of > the day bisecting the recent ath9k changes to identify the culprit: > 43c3528430bd29f5e5243. I tried verious things like setting the antenna / > removing the "iw antenna all all" call from the ath9k script / etc but I > could > not make it work. Only reverting the patch makes wifi usuable again. Did you also try iw phy0 antenna 1 2?
> Besides, I don't quite get the idea behind "all all" - there a lot of devices > out there that support more antennas than they use: the OM2P is a 1x2 with > one > antenna, the bullet is 2x2 with one antenna, etc. Can somebody shed some > light on this ? The chip supports more than what is connected on the route, normally the EEPROM capabilities force the driver to use only what's on the board, but sometimes the manufacturer puts in stupid values and 'fixes' it with software hackery instead. Does the O2MP have a second antenna port, or a PCB antenna or something like that? - Felix _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
