This patch adds support for the Accton WR6202 Mini 3G broadband router.
Full details for this device are available at
http://www.awbnetworks.com/products03.php?Fullkey=19.
This device is identical to the SMCWBR11S-3GN:
http://www.smc-asia.com/products03.php?Fullkey=210
It's also worth noting that this board has a GPIO line to control the
power to the USB port.
Signed-off-by: Johnathan Boyce <[email protected]>
---
Index: target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
===================================================================
--- target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig (revision 30406)
+++ target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig (working copy)
@@ -106,6 +106,12 @@
select RALINK_DEV_GPIO_BUTTONS
select RALINK_DEV_GPIO_LEDS
+config RT305X_MACH_WR6202
+ bool "Accton WR6202"
+ default y
+ select RALINK_DEV_GPIO_BUTTONS
+ select RALINK_DEV_GPIO_LEDS
+
endmenu
endif
Index: target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wr6202.c
===================================================================
--- target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wr6202.c
(revision 0)
+++ target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wr6202.c
(revision 0)
@@ -0,0 +1,123 @@
+/*
+ * AWB WR6202 board support
+ *
+ * Copyright (C) 2012 Johnathan Boyce<[email protected]>
+ *
+ */
+
+#include<linux/init.h>
+#include<linux/platform_device.h>
+#include<linux/mtd/mtd.h>
+#include<linux/mtd/partitions.h>
+#include<linux/mtd/physmap.h>
+#include<linux/gpio.h>
+
+#include<asm/mach-ralink/machine.h>
+#include<asm/mach-ralink/dev-gpio-buttons.h>
+#include<asm/mach-ralink/dev-gpio-leds.h>
+#include<asm/mach-ralink/rt305x.h>
+#include<asm/mach-ralink/rt305x_regs.h>
+
+#include "devices.h"
+
+#define WR6202_GPIO_BUTTON_RESET 10 /* active low */
+#define WR6202_GPIO_BUTTON_WPS 0 /* active low */
+
+#define WR6202_BUTTONS_POLL_INTERVAL 20
+
+#define WR6202_GPIO_USB_POWER 11
+
+#define WR6202_GPIO_LED_3G 13
+#define WR6202_GPIO_LED_WPS 14
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition wr6202_partitions[] = {
+ {
+ .name = "uboot",
+ .offset = 0,
+ .size = 0x030000,
+ }, {
+ .name = "uboot-config",
+ .offset = 0x030000,
+ .size = 0x040000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "factory",
+ .offset = 0x040000,
+ .size = 0x050000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "linux",
+ .offset = 0x050000,
+ .size = 0x100000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x150000,
+ .size = 0x6B0000,
+ }
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct physmap_flash_data wr6202_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+ .nr_parts = ARRAY_SIZE(wr6202_partitions),
+ .parts = wr6202_partitions,
+#endif
+};
+
+static struct gpio_led wr6202_leds_gpio[] __initdata = {
+ {
+ .name = "wr6202:blue:wps",
+ .gpio = WR6202_GPIO_LED_WPS,
+ .active_low = 1,
+ }, {
+ .name = "wr6202:blue:3g",
+ .gpio = WR6202_GPIO_LED_3G,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_button wr6202_gpio_buttons[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .threshold = 3,
+ .gpio = WR6202_GPIO_BUTTON_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .threshold = 3,
+ .gpio = WR6202_GPIO_BUTTON_WPS,
+ .active_low = 1,
+ }
+};
+
+static void __init wr6202_init(void)
+{
+ rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL;
+
+ rt305x_gpio_init(RT305X_GPIO_MODE_GPIO<< RT305X_GPIO_MODE_UART0_SHIFT);
+
+ ramips_register_gpio_leds(-1, ARRAY_SIZE(wr6202_leds_gpio),
+ wr6202_leds_gpio);
+ ramips_register_gpio_buttons(-1, WR6202_BUTTONS_POLL_INTERVAL,
+ ARRAY_SIZE(wr6202_gpio_buttons),
+ wr6202_gpio_buttons);
+
+ /* Power to the USB port is controlled by GPIO line */
+ gpio_request(WR6202_GPIO_USB_POWER, "WR6202_GPIO_USB_POWER");
+ gpio_direction_output(WR6202_GPIO_USB_POWER, 0);
+ gpio_free(WR6202_GPIO_USB_POWER);
+
+ rt305x_register_flash(0,&wr6202_flash_data);
+ rt305x_register_ethernet();
+ rt305x_register_wifi();
+ rt305x_register_wdt();
+ rt305x_register_usb();
+}
+
+MIPS_MACHINE(RAMIPS_MACH_WR6202, "WR6202", "AWB WR6202",
+ wr6202_init);
Index: target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
===================================================================
--- target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile (revision 30406)
+++ target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile (working copy)
@@ -32,3 +32,4 @@
obj-$(CONFIG_RT305X_MACH_WR512_3GN) += mach-wr512-3gn.o
obj-$(CONFIG_RT305X_MACH_WL341V3) += mach-wl341v3.o
obj-$(CONFIG_RT305X_MACH_WL351) += mach-wl351.o
+obj-$(CONFIG_RT305X_MACH_WR6202) += mach-wr6202.o
Index: target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
===================================================================
--- target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
(revision 30406)
+++ target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
(working copy)
@@ -45,4 +45,5 @@
RAMIPS_MACH_WL341V3, /* Sitecom WL-341 v3 */
RAMIPS_MACH_WL351, /* Sitecom WL-351 v1 002 */
RAMIPS_MACH_WR512_3GN, /* SH-WR512NU/WS-WR512N1-like 3GN*/
+ RAMIPS_MACH_WR6202, /* Accton WR6202 */
};
Index: target/linux/ramips/image/Makefile
===================================================================
--- target/linux/ramips/image/Makefile (revision 30406)
+++ target/linux/ramips/image/Makefile (working copy)
@@ -167,6 +167,16 @@
$(call
BuildFirmware/NW718,$(1),$(2),board=$(3),mtdlayout_nw718,851968,2949120)
endef
+console_WR6202=ttyS1,115200
+mtdlayout_WR6202=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,1024k(kernel),6848k(rootfs),7872k@0x50000(firmware)
+define Image/Build/Template/WR6202
+ $(call BuildFirmware/Generic,$(1),$(2),board=$(3)
console=$(console_WR6202),mtdlayout_WR6202,1048576,7012352)
+endef
+
+define Image/Build/Profile/WR6202
+ $(call Image/Build/Template/WR6202,$(1),wr6202,WR6202)
+endef
+
console_OMNIEMB=ttyS1,57600
mtdlayout_ONMIEMB=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,1024k(kernel),6848k(rootfs),7872k@0x50000(firmware)
define Image/Build/Template/OMNIEMB
@@ -328,6 +338,7 @@
$(call Image/Build/Profile/WR5123GN,$(1))
$(call Image/Build/Profile/WL341V3,$(1))
$(call Image/Build/Profile/WL351,$(1))
+ $(call Image/Build/Profile/WR6202,$(1))
endef
endif
Index: target/linux/ramips/rt305x/config-2.6.39
===================================================================
--- target/linux/ramips/rt305x/config-2.6.39 (revision 30406)
+++ target/linux/ramips/rt305x/config-2.6.39 (working copy)
@@ -112,6 +112,7 @@
CONFIG_RT305X_MACH_WL341V3=y
CONFIG_RT305X_MACH_WL351=y
CONFIG_RT305X_MACH_WR512_3GN=y
+CONFIG_RT305X_MACH_WR6202=y
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RT288X=y
Index: target/linux/ramips/base-files/lib/ramips.sh
===================================================================
--- target/linux/ramips/base-files/lib/ramips.sh (revision 30406)
+++ target/linux/ramips/base-files/lib/ramips.sh (working copy)
@@ -128,6 +128,9 @@
*"WR512-3GN-like router")
name="wr512-3gn"
;;
+ *"AWB WR6202")
+ name="wr6202"
+ ;;
*)
name="generic"
;;
Index: target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
===================================================================
--- target/linux/ramips/base-files/lib/preinit/06_set_iface_mac (revision 30406)
+++ target/linux/ramips/base-files/lib/preinit/06_set_iface_mac (working copy)
@@ -25,7 +25,8 @@
hw550-3g |\
nbg-419n |\
omni-emb |\
- w502u)
+ w502u |\
+ wr6202)
mac=$(ramips_get_mac_binary factory 40)
ifconfig eth0 hw ether $mac 2>/dev/null
;;
Index: target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
===================================================================
--- target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
(revision 30406)
+++ target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
(working copy)
@@ -64,7 +64,8 @@
whr-g300n | \
wl-351 | \
wli-tx4-ag300n | \
- wr512-3gn)
+ wr512-3gn | \
+ wr6202)
rt2x00_eeprom_extract "factory" 0 272
;;
Index: target/linux/ramips/base-files/etc/uci-defaults/network
===================================================================
--- target/linux/ramips/base-files/etc/uci-defaults/network (revision 30406)
+++ target/linux/ramips/base-files/etc/uci-defaults/network (working copy)
@@ -23,7 +23,8 @@
argus-atp52b | \
b2c | \
nw718 | \
- w502u)
+ w502u | \
+ wr6202)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
;;
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
