Hi Gabor, What was the problem with the patch, It applied fine to rev 30406?
On 11 February 2012 15:55, Gabor Juhos <[email protected]> wrote: > Hi Johnathan, > > > This patch adds support for the Accton WR6202 Mini 3G broadband router. > Full > > details for this device are available at > > http://www.awbnetworks.com/products03.php?Fullkey=19. > > > > This device is identical to the SMCWBR11S-3GN: > > http://www.smc-asia.com/products03.php?Fullkey=210 > > > > It's also worth noting that this board has a GPIO line to control the > power to > > the USB port. > > > > > > Signed-off-by: Johnathan Boyce <[email protected]> > > Applied, however I had to fix the patch manually. > > > Applying patch > patches/1852-OpenWrt-Devel-ramips-add-support-for-Accton-WR6202-SMCWBR11S-3GN-reformatted-patch.patch > > patching file target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig > > Hunk #1 FAILED at 106. > > 1 out of 1 hunk FAILED -- rejects in file > target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig > > patching file > target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wr6202.c > > patching file target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile > > Hunk #1 FAILED at 32. > > 1 out of 1 hunk FAILED -- rejects in file > target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile > > patching file > target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h > > Hunk #1 FAILED at 45. > > 1 out of 1 hunk FAILED -- rejects in file > target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h > > patching file target/linux/ramips/image/Makefile > > Hunk #1 FAILED at 167. > > Hunk #2 FAILED at 328. > > 2 out of 2 hunks FAILED -- rejects in file > target/linux/ramips/image/Makefile > > patching file target/linux/ramips/rt305x/config-2.6.39 > > Hunk #1 FAILED at 112. > > 1 out of 1 hunk FAILED -- rejects in file > target/linux/ramips/rt305x/config-2.6.39 > > patching file target/linux/ramips/base-files/lib/ramips.sh > > patching file target/linux/ramips/base-files/lib/preinit/06_set_iface_mac > > patching file > target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom > > patching file target/linux/ramips/base-files/etc/uci-defaults/network > > Patch > patches/1852-OpenWrt-Devel-ramips-add-support-for-Accton-WR6202-SMCWBR11S-3GN-reformatted-patch.patch > does not apply (enforce with -f) > > Please check your patch next time. > > Thanks, > Gabor >
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
