> Done. Does 30dBm mean it has 10dBm power offset? Yes, the Pico 2 and 2 HP is essentially a Bullet 2 or Bullet 2 HP in a case. It even has Bullet 2 or Bullet 2 H printed on the circuitboard. Funny.
> Does it indeed find no IDs? In this case I'd be interested in a copy of > the boardconfig partition. No, it does not yet, but it may not look for them yet either - after all there is nothing in the code for Picos until now. There is also no specific image for the Pico M created - just for Nano M, Rocket M and Bullet M. There is also no image for the Loco M created, although it would be worthwhile, as it has a different maximum power (23dBm) compared to the Nano M (28dBm), and it has only one Ethernet jack (eth0),as opposed to the Nano M, which has two (eth0 and eth1 work), but for the Nano M the default configuration in OpenWrt does not even define eth1 from the start. Something that could be fixed? On 20 February 2012 22:59, Jo-Philipp Wich <[email protected]> wrote: > Hi. > >> What is not so nice is the txpowerlist. As I had reported last year, the >> system reports 27dBm regardless which hardware is used. > > Thats a mac80211 problem though, beyound the scope of iwinfo. It takes > the driver reported values and uses them. > >> I can also confirm the following devices which would be nice to add to >> the list >> https://dev.openwrt.org/browser/trunk/package/iwinfo/src/iwinfo_lib.c: >> >> Ubiquiti Picostation 2: 168C:0013 0777:C302 – max 20dBm >> Ubiquiti Picostation 2 HP: 168C:0013 0777:C3A2 – max 30dBm > > Done. Does 30dBm mean it has 10dBm power offset? > >> By the way, the susbsystem Id of the Picostation M2 is 0xe302, which >> would also be nice to add to the list in >> https://dev.openwrt.org/browser/trunk/package/iwinfo/src/iwinfo_lib.c > > Done. > >> Picostation M2 >> [...] >> Hardware: unknown [Generic MAC80211] > > Does it indeed find no IDs? In this case I'd be interested in a copy of > the boardconfig partition. > > > ~ Jow > _______________________________________________ > openwrt-devel mailing list > [email protected] > https://lists.openwrt.org/mailman/listinfo/openwrt-devel _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
