Hi jow,
Thanks for your efforts.
I can confirm the Picostation M2 is now properly recognised.
The Pico2 and Pico2HP however are not recognised.
There is also a regression in so much as the Nanostation2 is no longer
recognised as such (see below).
I can help out with a dump of the Nanostation eeprom if this helps? Please
advise
BusyBox v1.19.3 (2012-02-18 00:38:31 NZDT) built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
ATTITUDE ADJUSTMENT (bleeding edge, r30668) ----------
* 1/4 oz Vodka Pour all ingredients into mixing
* 1/4 oz Gin tin with ice, strain into glass.
* 1/4 oz Amaretto
* 1/4 oz Triple sec
* 1/4 oz Peach schnapps
* 1/4 oz Sour mix
* 1 splash Cranberry juice
-----------------------------------------------------
root@Router0015610:~# iwinfo wlan0 info
wlan0 ESSID: "Chillifire Hotspot"
Access Point: 00:15:6D:DA:E1:A0
Mode: Master Channel: 3 (2.422 GHz)
Tx-Power: 27 dBm Link Quality: 0/70
Signal: unknown Noise: -109 dBm
Bit Rate: unknown
Encryption: none
Type: nl80211 HW Mode(s): 802.11bg
Hardware: unknown [Generic MAC80211]
TX power offset: unknown
Frequency offset: unknown
Supports VAPs: yes
root@Router0015610:~# iwinfo wlan0 txpowerlist
0 dBm ( 1 mW)
1 dBm ( 1 mW)
2 dBm ( 1 mW)
3 dBm ( 1 mW)
4 dBm ( 2 mW)
5 dBm ( 3 mW)
6 dBm ( 3 mW)
7 dBm ( 5 mW)
8 dBm ( 6 mW)
9 dBm ( 7 mW)
10 dBm ( 10 mW)
11 dBm ( 12 mW)
12 dBm ( 15 mW)
13 dBm ( 19 mW)
14 dBm ( 25 mW)
15 dBm ( 31 mW)
16 dBm ( 39 mW)
17 dBm ( 50 mW)
18 dBm ( 63 mW)
19 dBm ( 79 mW)
20 dBm ( 100 mW)
21 dBm ( 125 mW)
22 dBm ( 158 mW)
23 dBm ( 199 mW)
24 dBm ( 251 mW)
25 dBm ( 316 mW)
26 dBm ( 398 mW)
* 27 dBm ( 501 mW)
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Jo-Philipp
Wich
Sent: Tuesday, 21 February 2012 10:51 a.m.
To: OpenWrt Development List
Subject: Re: [OpenWrt-Devel] Tested Changeset 30605: [package] iwinfo:
implement proper hardware detection for ar23xx SoC devices like the
NanoStation 2
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi,
thanks for providing the dump, it should get properly recognized now after
https://dev.openwrt.org/changeset/30663 .
~ Jow
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAk9CwE0ACgkQdputYINPTPN2SgCeMDbsmU194qnRnmcAcNs8TGn2
Y7MAnjych8ZLXAh5OfypaP93Mwd4Q59e
=ttEk
-----END PGP SIGNATURE-----
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
