Hi peter!
sorry, I have not tried to connect SDIO device but I remember someone said
SD slot of rspro is not usable with any other device except SD storage card...
Here is SD slot part of lsusb messages and it looks it's not sdio
interface anymore. no?
---
Bus 001 Device 002: ID 05e3:0723 Genesys Logic, Inc. GL827L SD/MMC/MS
Flash Card Reader
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x05e3 Genesys Logic, Inc.
idProduct 0x0723 GL827L SD/MMC/MS Flash Card Reader
bcdDevice 94.51
iManufacturer 3 Generic
iProduct 4 USB Storage
iSerial 2 000000009451
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
---
Regards,
matsu
2012/2/22 peter.meng <[email protected]>:
> HI,Matsu
>
> Thank you .
> I want to know whether i can connect a SDIO device (not SD card, such
> as wifi based on sdio) after install following modules .
>
>
> Thanks a lot
> Best Regards
> Peter Meng
>
> On Wed, Feb 22, 2012 at 8:27 PM, Kentaro Matsuyama
> <[email protected]> wrote:
>> hi peter!
>>
>> I have several rspro board.
>> You need to install below kernel modules related with usb2. because
>> rspro board has converter
>> device from mmc to usb, i guess.
>>
>> kmod-nls-iso8859-1
>> kmod-nls-utf8
>> kmod-fs-vfat
>> kmod-usb2
>> kmod-usb-storage
>>
>> Regards
>> matsu
>>
>> 2012/2/22 peter.meng <[email protected]>:
>>> HI,
>>>
>>> I just got a Linux StarterKit board that compile it with Ubiquiti
>>> RouterStation Pro on openwrt .
>>> I met the issue that can't access my SD card , dmesg didn't show mmc
>>> message too when plug SD card .
>>>
>>> lsmod | grep mmc
>>> gpiommc 3712 0
>>> spi_gpio_old 2929 1 gpiommc
>>> mmc_spi 9264 0
>>> mmc_block 7440 0
>>>
>>> Anybody can give me the suggestion on this ?
>>>
>>>
>>>
>>> Best Regards .
>>> Peter Meng
>>> [email protected]
>>> _______________________________________________
>>> openwrt-devel mailing list
>>> [email protected]
>>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
>> _______________________________________________
>> openwrt-devel mailing list
>> [email protected]
>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
> _______________________________________________
> openwrt-devel mailing list
> [email protected]
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
