Thanks Matsu . On Thu, Feb 23, 2012 at 12:15 AM, Kentaro Matsuyama <kentaro.matsuy...@gmail.com> wrote: > Hi peter! > > sorry, I have not tried to connect SDIO device but I remember someone said > SD slot of rspro is not usable with any other device except SD storage card... > > Here is SD slot part of lsusb messages and it looks it's not sdio > interface anymore. no? > > --- > Bus 001 Device 002: ID 05e3:0723 Genesys Logic, Inc. GL827L SD/MMC/MS > Flash Card Reader > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 2.00 > bDeviceClass 0 (Defined at Interface level) > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 64 > idVendor 0x05e3 Genesys Logic, Inc. > idProduct 0x0723 GL827L SD/MMC/MS Flash Card Reader > bcdDevice 94.51 > iManufacturer 3 Generic > iProduct 4 USB Storage > iSerial 2 000000009451 > bNumConfigurations 1 > Configuration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 32 > bNumInterfaces 1 > bConfigurationValue 1 > iConfiguration 0 > bmAttributes 0x80 > (Bus Powered) > MaxPower 500mA > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 8 Mass Storage > bInterfaceSubClass 6 SCSI > bInterfaceProtocol 80 Bulk-Only > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 EP 1 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0200 1x 512 bytes > bInterval 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x02 EP 2 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0200 1x 512 bytes > bInterval 0 > Device Qualifier (for other device speed): > bLength 10 > bDescriptorType 6 > bcdUSB 2.00 > bDeviceClass 0 (Defined at Interface level) > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 64 > bNumConfigurations 1 > Device Status: 0x0000 > (Bus Powered) > --- > > Regards, > matsu > > 2012/2/22 peter.meng <mengsans...@gmail.com>: >> HI,Matsu >> >> Thank you . >> I want to know whether i can connect a SDIO device (not SD card, such >> as wifi based on sdio) after install following modules . >> >> >> Thanks a lot >> Best Regards >> Peter Meng >> >> On Wed, Feb 22, 2012 at 8:27 PM, Kentaro Matsuyama >> <kentaro.matsuy...@gmail.com> wrote: >>> hi peter! >>> >>> I have several rspro board. >>> You need to install below kernel modules related with usb2. because >>> rspro board has converter >>> device from mmc to usb, i guess. >>> >>> kmod-nls-iso8859-1 >>> kmod-nls-utf8 >>> kmod-fs-vfat >>> kmod-usb2 >>> kmod-usb-storage >>> >>> Regards >>> matsu >>> >>> 2012/2/22 peter.meng <mengsans...@gmail.com>: >>>> HI, >>>> >>>> I just got a Linux StarterKit board that compile it with Ubiquiti >>>> RouterStation Pro on openwrt . >>>> I met the issue that can't access my SD card , dmesg didn't show mmc >>>> message too when plug SD card . >>>> >>>> lsmod | grep mmc >>>> gpiommc 3712 0 >>>> spi_gpio_old 2929 1 gpiommc >>>> mmc_spi 9264 0 >>>> mmc_block 7440 0 >>>> >>>> Anybody can give me the suggestion on this ? >>>> >>>> >>>> >>>> Best Regards . >>>> Peter Meng >>>> mengsans...@gmail.com >>>> _______________________________________________ >>>> openwrt-devel mailing list >>>> openwrt-devel@lists.openwrt.org >>>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel >>> _______________________________________________ >>> openwrt-devel mailing list >>> openwrt-devel@lists.openwrt.org >>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel >> _______________________________________________ >> openwrt-devel mailing list >> openwrt-devel@lists.openwrt.org >> https://lists.openwrt.org/mailman/listinfo/openwrt-devel > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/mailman/listinfo/openwrt-devel
-- Best Regards . Peter Meng mengsans...@gmail.com _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
