Hi all,
I've been working on the dgn3500 implementation and I have a patch that fully
supports this platform. I need advice on an init script to load the eeprom from
user-space:
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2012 Pieter Voorthuijsen
+
+START=04
+start() {
+ echo "Loading eeprom into platform data"
+ dd if=/dev/mtd2 of=/sys/firmware/ath_eeprom bs=1k skip=60 count=4
+ echo 0 > /sys/bus/pci/slots/0000\:00\:0e.0/power
+ sleep 1
+ echo 1 > /sys/bus/pci/rescan
+}
+
I want to place this in rc.d (S04athfixup), is that the right spot?
Right now the code runs for all lantiq boards, can I detect the board in this
stage?
Kind regards,
Pieter
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
