On 07/05/12 21:39, Pieter Voorthuijsen wrote:
> Hi all,
>
> I've been working on the dgn3500 implementation and I have a patch that
> fully supports this platform. I need advice on an init script to load
> the eeprom from user-space:
>
> +#!/bin/sh /etc/rc.common
> +# Copyright (C) 2012 Pieter Voorthuijsen
> +
> +START=04
> +start() {
> + echo "Loading eeprom into platform data"
> + dd if=/dev/mtd2 of=/sys/firmware/ath_eeprom bs=1k skip=60 count=4
> + echo 0 > /sys/bus/pci/slots/0000\:00\:0e.0/power
> + sleep 1
> + echo 1 > /sys/bus/pci/rescan
> +}
> +
>
> I want to place this in rc.d (S04athfixup), is that the right spot?
> Right now the code runs for all lantiq boards, can I detect the board in
> this stage?
>
> Kind regards,
> Pieter
Hi,
we will move the lantiq target to OF support soon and will need to find
a more generic solution for this problem anyhow.
i am currently considering to load pci after nand/spi to be able to get
the pci fixup code to load the eeprom directly.
anyhow, i have no problem merging the porposed patch as long as it works.
John
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
