On 21/05/12 22:14, Spyridon Tompros wrote: > On 21/05/2012 18:16, John Crispin wrote: >> On 21/05/12 17:48, Spyridon Tompros wrote: >>> Hi all, >>> >>> currently we test our last left-for-testing xDSL interface. The Danube >>> tries to synchronise but without result. Might be a SW problem of the >>> OpenWRT trunk version we use. Our HW is totally identical to that of >>> Lantiq's RDK. We've also used the add-on front-end of Lantiq's RDK in >>> the place of ours with the same results. >> So you mean that you plug a cable into the AFE and you get no link >> resulting in no showtime ? Did you try the same image on a easy50712 ? > Exactly (periodically reports "leaving showtime"). We've checked it on > an easy RDK. It works but marginally. (Takes too much time to get > connected) while Danube gets very hot. >>
Ok, so it works but the experience is "its slow". The reports up to now have been, that the dsl driver works very well. I have to admit, that i am not really sure how to track this down. I will garb one of the thermometers later today and check if i see a difference in SoC temperature with DSL up and down and then let you know Thanks, John _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
