On Wed, 2012-05-23 at 20:26 +0200, John Crispin wrote:
> On 23/05/12 20:07, John Crispin wrote:
> i think we should change this to not use xtu bits unless explicitly set
> .... can you try with this patch applied ?
>
Success.
That patch didn't work. The -i is necessary. It's also a critical param,
as the first setting seems to stick till reboot. Which is annoying, as
all subsequent tests are pointless.
Anyway, going back to the bare -i works.
The xtu value is perhaps wrong for annex a2p?
network.adsl.fwannex=a
network.adsl.annex=a2p
annex_a2p=00_00_00_00_00_01_00_00
Patch:
diff --git a/package/ltq-dsl-app/files/dsl_control
b/package/ltq-dsl-app/files/dsl_control
index e833854..4dc1738 100644
--- a/package/ltq-dsl-app/files/dsl_control
+++ b/package/ltq-dsl-app/files/dsl_control
@@ -296,7 +296,7 @@ start() {
echo "invalid fwannex: $fwannex"
# start CPE dsl daemon in the background
- service_start /sbin/dsl_cpe_control -i${xtu} \
+ service_start /sbin/dsl_cpe_control -i \
-n /sbin/dsl_notify.sh \
-f /lib/firmware/dsl-fw-${fwannex}.bin
}
Status:
root@OpenWrt:~# /etc/init.d/dsl_control status
Chipset: Ifx-Danube 1.5
Line State: DOWN [0x300: handshake]
DSL[00]: ERROR - Function is only available in the SHOWTIME!
[ 54.468000] DSL[00]: ERROR - Function is only available in the SHOWTIME!
Data Rate: 0 b/s / 0 b/s
[ 54.540000] DSL[00]: ERROR - Function is only available in the SHOWTIME!
[ 54.612000] DSL[00]: ERROR - Function is only available in the SHOWTIME!
Line Attenuation: 0.0dB / 0.0dB
Noise Margin: 0.0dB / 0.0dB
Line Uptime: down
root@OpenWrt:~# /etc/init.d/dsl_control status
Chipset: Ifx-Danube 1.5
Line State: DOWN [0x380: full_init]
[ 60.020000] DSL[00]: ERROR - Function is only available in the SHOWTIME!
[ 60.080000] DSL[00]: ERROR - Function is only available in the SHOWTIME!
Data Rate: 0 b/s / 0 b/s
[ 60.152000] DSL[00]: ERROR - Function is only available in the SHOWTIME!
[ 60.224000] DSL[00]: ERROR - Function is only available in the SHOWTIME!
Line Attenuation: 0.0dB / 0.0dB
Noise Margin: 0.0dB / 0.0dB
Line Uptime: down
root@OpenWrt:~# /etc/init.d/dsl_control status
Chipset: Ifx-Danube 1.5
Line State: DOWN [0x380: full_init]
[ 63.184000] DSL[00]: ERROR - Function is only available in the SHOWTIME!
[ 63.244000] DSL[00]: ERROR - Function is only available in the SHOWTIME!
Data Rate: 0 b/s / 0 b/s
[ 63.316000] DSL[00]: ERROR - Function is only available in the SHOWTIME!
[ 63.392000] DSL[00]: ERROR - Function is only available in the SHOWTIME!
Line Attenuation: 0.0dB / 0.0dB
Noise Margin: 0.0dB / 0.0dB
Line Uptime: down
root@OpenWrt:~# [ 64.372000] [DSL_BSP_Showtime 916]: Datarate US intl =
256000, fast = 0
root@OpenWrt:~# /etc/init.d/dsl_control status
Chipset: Ifx-Danube 1.5
Line State: UP [0x801: showtime_tc_sync]
Data Rate: 1.024 Mb/s / 256 Kb/s
Line Attenuation: 30.3dB / 14.5dB
Noise Margin: 36.9dB / 31.0dB
Line Uptime: 2s
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
