Hi André, On Fri, Nov 09, 2012 at 04:40:19PM +0000, André Valentin wrote: > [ 0.000000] Linux version 3.6.6 (avalentin@varus) (gcc version 4.6.4 > 20121001 (prerelease) (Linaro GCC 4.6-2012.10) ) #6 Thu Nov 8 21:37:22 CET > 2012 > [ 0.000000] SoC: AR9 rev 1.2 > [ 0.000000] bootconsole [early0] enabled > [ 0.000000] CPU revision is: 0001954c (MIPS 34Kc) > [ 0.000000] Determined physical RAM map: > [ 0.000000] memory: 04000000 @ 00000000 (usable) > [ 0.000000] Initrd not found or empty - disabling initrd > [ 0.000000] Zone ranges: > [ 0.000000] Normal [mem 0x00000000-0x03ffffff] > [ 0.000000] Movable zone start for each node > [ 0.000000] Early memory node ranges > [ 0.000000] node 0: [mem 0x00000000-0x03ffffff] > [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. > [ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 > bytes > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total > pages: 16256 > [ 0.000000] Kernel command line: console=ttyLTQ0,115200 init=/etc/preinit > [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes) > [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) > [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) > [ 0.000000] __ex_table already sorted, skipping sort > [ 0.000000] Writing ErrCtl register=000692a5 > [ 0.000000] Readback ErrCtl register=000692a5 > [ 0.000000] Memory: 61628k/65536k available (2455k kernel code, 3908k > reserved, 428k data, 176k init, 0k highmem) > [ 0.000000] NR_IRQS:256 > [ 0.000000] CPU Clock: 600MHz > [ 0.000000] Calibrating delay loop... 397.82 BogoMIPS (lpj=795648) > [ 0.032000] pid_max: default: 32768 minimum: 301 > [ 0.032000] Mount-cache hash table entries: 512 > [ 0.036000] pinctrl core: initialized pinctrl subsystem > [ 0.040000] NET: Registered protocol family 16 > [ 0.044000] dma-xway 1e104100.dma: Init done - hw rev: 6, ports: 5, > channels: 20 > [ 0.048000] dma-xway 1e104100.dma: init done > [ 0.052000] pinctrl-xway 1e100b10.pinmux: Init done > [ 0.056000] gptu-xway 1e100a00.gptu: gptu: 6 timers loaded > [ 0.060000] Data bus error, epc == 80262008, ra == 80261fcc > [ 0.060000] Oops[#1]: > [ 0.060000] Cpu 0 > [ 0.060000] $ 0 : 00000000 00000067 be105400 feffffff > [ 0.060000] $ 4 : ffffffff 80295a20 83829ce4 00000007 > [ 0.060000] $ 8 : 00000020 00000003 00000008 ffffff80 > [ 0.060000] $12 : 03bd0000 ac000000 00000000 64000000 > [ 0.060000] $16 : 83857788 80330000 83857780 80330000 > [ 0.060000] $20 : 81000c0c 80330000 80330000 80330000 > [ 0.060000] $24 : 00000018 8000364c > [ 0.060000] $28 : 83828000 83829d60 802b321c 80261fcc > [ 0.060000] Hi : 00000000 > [ 0.060000] Lo : 00000000 > [ 0.060000] epc : 80262008 0x80262008 > [ 0.060000] Not tainted > [ 0.060000] ra : 80261fcc 0x80261fcc > [ 0.060000] Status: 1100fc03 KERNEL EXL IE > [ 0.060000] Cause : 1080001c > [ 0.060000] PrId : 0001954c (MIPS 34Kc) > [ 0.060000] Modules linked in: > [ 0.060000] Process swapper (pid: 1, threadinfo=83828000, task=83827928, > tls=00000000) > [ 0.060000] Stack : 83857790 ffffffed 802bc680 802ce634 00000016 83857788 > 80330000 802ce634 > ffffffed 802bc680 802ce634 00000016 802d3210 8016e730 83857788 > 802ce634 > 802ce634 8017009c 834015e0 838577bc 83857788 802ce634 802ce634 > 00000000 > 80300000 8016e908 802ce634 8016ca1c 8385d480 00000000 00000000 > 802ce634 > 8016e89c 8016cd18 00000000 83860288 802cc0a0 8016c99c 838254cc > 8385db30 > ... > [ 0.060000] Call Trace:[<802d3210>] 0x802d3210 > [ 0.060000] [<8016e730>] 0x8016e730 > [ 0.060000] [<8017009c>] 0x8017009c > [ 0.060000] [<8016e908>] 0x8016e908 > [ 0.060000] [<8016ca1c>] 0x8016ca1c > [ 0.060000] [<8016e89c>] 0x8016e89c > [ 0.060000] [<8016cd18>] 0x8016cd18 > [ 0.060000] [<8016c99c>] 0x8016c99c > [ 0.060000] [<8016dcc0>] 0x8016dcc0 > [ 0.060000] [<80106ba0>] 0x80106ba0 > [ 0.060000] [<802e5314>] 0x802e5314 > [ 0.060000] [<8016ecb0>] 0x8016ecb0 > [ 0.060000] [<802d3210>] 0x802d3210 > [ 0.060000] [<80106cf8>] 0x80106cf8 > [ 0.060000] [<802e5314>] 0x802e5314 > [ 0.060000] [<802e532c>] 0x802e532c > [ 0.060000] [<80002900>] 0x80002900 > [ 0.060000] [<802d3a44>] 0x802d3a44 > [ 0.060000] [<802d3210>] 0x802d3210 > [ 0.060000] [<800064a0>] 0x800064a0 > [ 0.060000] [<802d3908>] 0x802d3908 > [ 0.060000] [<80006490>] 0x80006490 > [ 0.060000] > [ 0.060000] > Code: 8c440030 3c03feff 3463ffff <00831824> ac430030 0000000f 8e63f6a0 > 8e22f6a4 3c058029 > [ 0.064000] ---[ end trace 139ce121c98e96c9 ]--- > [ 0.064000] Kernel panic - not syncing: Attempted to kill init! > exitcode=0x0000000b > [ 0.064000] > ------------------------------------------------------------------------------------ > Does somebody have an idea what I did wrong? It's no problem for me to test, > I have serial console ;-)
AFAIK 3.6 kernel for lantiq is still a work in progres. Please recompile the image with symbol table information included. In "make menuconfig": Global build settings > Compile the kernel with symbol table information Luka _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
