Greetings, I have come across this document to setup a wifi bridge using two routers. http://wiki.openwrt.org/doc/recipes/relayclient
The guide explains assumes that you're bridging on either 2.4Ghz or the 5Ghz band, but not both. I've tried to extrapolate the means to bridge both bands on both the routers. However, on the main configuration of the wifi bridge, it lists only one stabridge. As it asks to create a stabridge and wwan, i created a stabridge2 and wwan2 and followed the instructions to the T to setup a bridge on the 5 Ghz band as well. Even after doing so, all the traffic is routed via the initially created bridge on the 2.4 Ghz band, even if a wifi client connects to the 5ghz band on the wifi bridge. In short, if a client connects to the wifi bridge's 5Ghz band, the traffic will be routed through the 2.4Ghz band to the main router (and the reverse when the client is receiving data from the internet). What am I doing wrong? Is what I'm trying to do even possible?
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
