Can anyone help me with the question above? Thanks. I've been struggling to get more than 65mbps with the pseudo-bridge router on either of the wifi bands (2.4 and 5Ghz).
On Wed, Jun 26, 2013 at 3:12 AM, Chirag Chhatriwala <[email protected]>wrote: > Greetings, > > I have come across this document to setup a wifi bridge using two routers. > http://wiki.openwrt.org/doc/recipes/relayclient > > The guide explains assumes that you're bridging on either 2.4Ghz or the > 5Ghz band, but not both. > I've tried to extrapolate the means to bridge both bands on both the > routers. However, on the main configuration of the wifi bridge, it lists > only one stabridge. > As it asks to create a stabridge and wwan, i created a stabridge2 and > wwan2 and followed the instructions to the T to setup a bridge on the 5 Ghz > band as well. > Even after doing so, all the traffic is routed via the initially created > bridge on the 2.4 Ghz band, even if a wifi client connects to the 5ghz band > on the wifi bridge. > > In short, if a client connects to the wifi bridge's 5Ghz band, the traffic > will be routed through the 2.4Ghz band to the main router (and the reverse > when the client is receiving data from the internet). > > What am I doing wrong? Is what I'm trying to do even possible? > > >
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
