I should be using the sysupgrade image then?
On Wed, Oct 2, 2013 at 12:09 PM, [email protected] <[email protected]>wrote: > On Wed, Oct 2, 2013 at 3:05 PM, Shawn Lewis <[email protected]> wrote: > > Progress, thanks! I now have the sysupgrade image, but no factory image. > I > > noticed that factory images aren't generated for a few of the other > ramips > > boards as well. > > Just start the board with the UART connected and pick update the > system image (choice 2 I think). There is only only image. Make sure > you have Luci enabled in the build. > > If you get tired of entering your IP address. Pick 4. > printenv > setenv ipaddr xxxxx > saveenv > reset > > Messing with choices 8 and 9 on the menu will give you heart burn. > You can do it but be prepared with a JTAG. > > > > > > > On Wed, Oct 2, 2013 at 5:24 AM, [email protected] <[email protected]> > > wrote: > >> > >> There are several things broken on the AsiaRF build. > >> 1) The build system has broken for things with hyphens in the name > >> 2) The rt5350 ethernet switch will not function unless VLAN tagging is > >> turned on. > >> > >> This patch will get it going again. > >> > >> On Wed, Oct 2, 2013 at 12:59 AM, Michel Stempin > >> <[email protected]> wrote: > >> > I had a similar issue with another board: it looks like the OpenWrt > >> > build > >> > system doesn't like board names containing a dash sign ("-"), try > >> > renaming > >> > it. > >> > > >> > Le 2 oct. 2013 à 03:30, Shawn Lewis <[email protected]> a écrit : > >> > > >> > I'm not getting factory/sysupgrade images for the ramips asiarf > target. > >> > > >> > If I build the default target profile I get all the other ramips > images. > >> > If > >> > I manually select "Asiarf AWM002-EVB" I get vmlinux and other > precursors > >> > to > >> > the actual image, but no flashable factory/sysupgrade images. > >> > > >> > Tried from trunk as of yesterday evening PST: > >> > > >> > svn://svn.openwrt.org/openwrt/trunk@38267 > >> > > >> > and > >> > > >> > svn://svn.openwrt.org/openwrt/trunk@37561 > >> > > >> > _______________________________________________ > >> > openwrt-devel mailing list > >> > [email protected] > >> > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > >> > > >> > > >> > _______________________________________________ > >> > openwrt-devel mailing list > >> > [email protected] > >> > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > >> > > >> > >> > >> > >> -- > >> Jon Smirl > >> [email protected] > >> > >> _______________________________________________ > >> openwrt-devel mailing list > >> [email protected] > >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > >> > > > > > > _______________________________________________ > > openwrt-devel mailing list > > [email protected] > > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > > > > > > -- > Jon Smirl > [email protected] > _______________________________________________ > openwrt-devel mailing list > [email protected] > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
