On Wed, Oct 2, 2013 at 4:38 PM, Shawn Lewis <[email protected]> wrote: > I should be using the sysupgrade image then?
/openwrt/bin/ramips/openwrt-ramips-rt305x-awm002-evb-8M-squashfs-sysupgrade.bin > > > On Wed, Oct 2, 2013 at 12:09 PM, [email protected] <[email protected]> > wrote: >> >> On Wed, Oct 2, 2013 at 3:05 PM, Shawn Lewis <[email protected]> wrote: >> > Progress, thanks! I now have the sysupgrade image, but no factory image. >> > I >> > noticed that factory images aren't generated for a few of the other >> > ramips >> > boards as well. >> >> Just start the board with the UART connected and pick update the >> system image (choice 2 I think). There is only only image. Make sure >> you have Luci enabled in the build. >> >> If you get tired of entering your IP address. Pick 4. >> printenv >> setenv ipaddr xxxxx >> saveenv >> reset >> >> Messing with choices 8 and 9 on the menu will give you heart burn. >> You can do it but be prepared with a JTAG. >> >> > >> > >> > On Wed, Oct 2, 2013 at 5:24 AM, [email protected] <[email protected]> >> > wrote: >> >> >> >> There are several things broken on the AsiaRF build. >> >> 1) The build system has broken for things with hyphens in the name >> >> 2) The rt5350 ethernet switch will not function unless VLAN tagging is >> >> turned on. >> >> >> >> This patch will get it going again. >> >> >> >> On Wed, Oct 2, 2013 at 12:59 AM, Michel Stempin >> >> <[email protected]> wrote: >> >> > I had a similar issue with another board: it looks like the OpenWrt >> >> > build >> >> > system doesn't like board names containing a dash sign ("-"), try >> >> > renaming >> >> > it. >> >> > >> >> > Le 2 oct. 2013 à 03:30, Shawn Lewis <[email protected]> a écrit : >> >> > >> >> > I'm not getting factory/sysupgrade images for the ramips asiarf >> >> > target. >> >> > >> >> > If I build the default target profile I get all the other ramips >> >> > images. >> >> > If >> >> > I manually select "Asiarf AWM002-EVB" I get vmlinux and other >> >> > precursors >> >> > to >> >> > the actual image, but no flashable factory/sysupgrade images. >> >> > >> >> > Tried from trunk as of yesterday evening PST: >> >> > >> >> > svn://svn.openwrt.org/openwrt/trunk@38267 >> >> > >> >> > and >> >> > >> >> > svn://svn.openwrt.org/openwrt/trunk@37561 >> >> > >> >> > _______________________________________________ >> >> > openwrt-devel mailing list >> >> > [email protected] >> >> > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >> >> > >> >> > >> >> > _______________________________________________ >> >> > openwrt-devel mailing list >> >> > [email protected] >> >> > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >> >> > >> >> >> >> >> >> >> >> -- >> >> Jon Smirl >> >> [email protected] >> >> >> >> _______________________________________________ >> >> openwrt-devel mailing list >> >> [email protected] >> >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >> >> >> > >> > >> > _______________________________________________ >> > openwrt-devel mailing list >> > [email protected] >> > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >> > >> >> >> >> -- >> Jon Smirl >> [email protected] >> _______________________________________________ >> openwrt-devel mailing list >> [email protected] >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > > > > _______________________________________________ > openwrt-devel mailing list > [email protected] > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > -- Jon Smirl [email protected] _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
