Re: [OpenWrt-Devel] [v3, 1/4] Add kernel support for Sagemcom F@ST2704V2 ADSL router

David Lang Sat, 09 Nov 2013 11:56:24 -0800

That doesn't slow down bitrot of the patches, that just works for one person'ssystems, for not.

Is there something wrong with this series that is preventing it from beingmerged upstream?


do you need people to report that they need it to get it review priority?

do you need reports of it working for people?

do you need someone to sponsor reviews of it?

There are a lot of people out there who would like to run OpenWRT on their ADSLrouter (myself included), so I would think that there's interest in addingsupport for these sorts of devices.


David Lang

On Fri, 8 Nov 2013, Martijn Zilverschoon wrote:

Well if you need this that badly, you can patch it yourself :)

Checkout the git repository:
git clone git://git.openwrt.org/openwrt.git

download the patches and apply them to the local git repo.
the command for that is: git apply 'example.patch' (make sure that you
are in the openwrt directory)
I think you have to apply 4 patches since this one is 1/4.

Sorry for the earlier message that was incomplete.

-Martijn

2013/11/8 Martijn Zilverschoon <[email protected]>:

Well if you need this that badly, you can patch it yourself :)

git clone git://git.openwrt.org/openwrt.git


2013/11/8 Weedy <[email protected]>:

Can this pretty please not die to bitrot?
I need this merged so badly ;_;


On Thu, Oct 31, 2013 at 7:33 PM, Marcin Jurkowski <[email protected]>
wrote:


This adds kernel support support for Sagemcom F@st 2704 wireless ADSL
router.
It's a BCM6328-based 802.11n wireless router with USB port and ADSL2+
modem equipped with 64 MiB RAM and 8 MiB flash.
---
 .../brcm63xx/patches-3.10/536-board_fast2704.patch | 133
+++++++++++++++++++++
 1 file changed, 133 insertions(+)
 create mode 100644
target/linux/brcm63xx/patches-3.10/536-board_fast2704.patch

diff --git a/target/linux/brcm63xx/patches-3.10/536-board_fast2704.patch
b/target/linux/brcm63xx/patches-3.10/536-board_fast2704.patch
new file mode 100644
index 0000000..db34932
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.10/536-board_fast2704.patch
@@ -0,0 +1,133 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1477,6 +1477,122 @@ static struct board_info __initdata boar
+       },
+ };
+
++static struct board_info __initdata board_FAST2704V2 = {
++      .name                           = "F@ST2704V2",
++      .expected_cpu_id                = 0x6328,
++
++      .has_uart0                      = 1,
++      .has_pci                        = 1,
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++      .has_usbd                       = 1,
++
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "Port 1",
++                      },
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "Port 2",
++                      },
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "Port 3",
++                      },
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "Port 4",
++                      },
++              },
++      },
++
++      .leds = {
++              /* front LEDs */
++              {
++                      .name                   =
"F@ST2704V2:green:power",
++                      .gpio                   = 4,
++                      .active_low             = 1,
++                      .default_trigger        = "default-on",
++              },
++              {
++                      .name                   = "F@ST2704V2:red:power",
++                      .gpio                   = 5,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "F@ST2704V2:red:inet",
++                      .gpio                   = 2,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "F@ST2704V2:green:dsl",
++                      .gpio                   = 3,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "F@ST2704V2:green:inet",
++                      .gpio                   = 11,
++                      .active_low             = 1,
++              },
++              {
++                      .name                   = "F@ST2704V2:green:usb",
++                      .gpio                   = 1,
++                      .active_low             = 1,
++              },
++
++              /* side button LEDs */
++              {
++                      .name                   = "F@ST2704V2:green:wps",
++                      .gpio                   = 10,
++                      .active_low             = 1,
++              },
++
++              /* FIXME: can't control gpio0 line in "out" state, needs
further investigation */
++              /*
++              {
++                      .name                   =
"F@ST2704V2:green:rfkill",
++                      .gpio                   = 0,
++                      .active_low             = 1,
++              },
++              */
++
++      },
++      .buttons = {
++              {
++                      .desc                   = "reset",
++                      .gpio                   = 23,
++                      .active_low             = 1,
++                      .type                   = EV_KEY,
++                      .code                   = KEY_RESTART,
++                      .debounce_interval      =
BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc                   = "wps",
++                      .gpio                   = 24,
++                      .active_low             = 1,
++                      .type                   = EV_KEY,
++                      .code                   = KEY_WPS_BUTTON,
++                      .debounce_interval      =
BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc                   = "rfkill",
++                      .gpio                   = 15,
++                      .active_low             = 1,
++                      .type                   = EV_KEY,
++                      .code                   = KEY_WLAN,
++                      .debounce_interval      =
BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
++
+ static struct board_info __initdata board_rta1025w_16 = {
+       .name                           = "RTA1025W_16",
+       .expected_cpu_id                = 0x6348,
+@@ -3810,6 +3926,7 @@ static const struct board_info __initcon
+       &board_963281TAN,
+       &board_963281T_TEF,
+       &board_dsl_274xb_f1,
++      &board_FAST2704V2,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
+       &board_96338gw,
--
1.8.1.5
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel




_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel

_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel

_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel

Re: [OpenWrt-Devel] [v3, 1/4] Add kernel support for Sagemcom F@ST2704V2 ADSL router

Reply via email to