On Sat, Nov 9, 2013 at 2:54 PM, David Lang <[email protected]> wrote: > That doesn't slow down bitrot of the patches, that just works for one > person's systems, for not. > > Is there something wrong with this series that is preventing it from being > merged upstream? > > do you need people to report that they need it to get it review priority? > > do you need reports of it working for people? > > do you need someone to sponsor reviews of it? > > There are a lot of people out there who would like to run OpenWRT on their > ADSL router (myself included), so I would think that there's interest in > adding support for these sorts of devices. > > ^ This. Pretty much anyone getting upgraded to VDSL in Canada could want this. We don't have a real bridge mode with the stock firmware and this is ass.
David Lang > > > On Fri, 8 Nov 2013, Martijn Zilverschoon wrote: > > Well if you need this that badly, you can patch it yourself :) >> >> Checkout the git repository: >> git clone git://git.openwrt.org/openwrt.git >> >> download the patches and apply them to the local git repo. >> the command for that is: git apply 'example.patch' (make sure that you >> are in the openwrt directory) >> I think you have to apply 4 patches since this one is 1/4. >> >> Sorry for the earlier message that was incomplete. >> >> -Martijn >> >> 2013/11/8 Martijn Zilverschoon <[email protected]>: >> >>> Well if you need this that badly, you can patch it yourself :) >>> >>> git clone git://git.openwrt.org/openwrt.git >>> >>> >>> 2013/11/8 Weedy <[email protected]>: >>> >>>> Can this pretty please not die to bitrot? >>>> I need this merged so badly ;_; >>>> >>>> >>>> On Thu, Oct 31, 2013 at 7:33 PM, Marcin Jurkowski <[email protected]> >>>> wrote: >>>> >>>>> >>>>> This adds kernel support support for Sagemcom F@st 2704 wireless ADSL >>>>> router. >>>>> It's a BCM6328-based 802.11n wireless router with USB port and ADSL2+ >>>>> modem equipped with 64 MiB RAM and 8 MiB flash. >>>>> --- >>>>> .../brcm63xx/patches-3.10/536-board_fast2704.patch | 133 >>>>> +++++++++++++++++++++ >>>>> 1 file changed, 133 insertions(+) >>>>> create mode 100644 >>>>> target/linux/brcm63xx/patches-3.10/536-board_fast2704.patch >>>>> >>>>> diff --git a/target/linux/brcm63xx/patches-3.10/536-board_ >>>>> fast2704.patch >>>>> b/target/linux/brcm63xx/patches-3.10/536-board_fast2704.patch >>>>> new file mode 100644 >>>>> index 0000000..db34932 >>>>> --- /dev/null >>>>> +++ b/target/linux/brcm63xx/patches-3.10/536-board_fast2704.patch >>>>> @@ -0,0 +1,133 @@ >>>>> +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c >>>>> ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c >>>>> +@@ -1477,6 +1477,122 @@ static struct board_info __initdata boar >>>>> + }, >>>>> + }; >>>>> + >>>>> ++static struct board_info __initdata board_FAST2704V2 = { >>>>> ++ .name = "F@ST2704V2", >>>>> ++ .expected_cpu_id = 0x6328, >>>>> ++ >>>>> ++ .has_uart0 = 1, >>>>> ++ .has_pci = 1, >>>>> ++ .has_ohci0 = 1, >>>>> ++ .has_ehci0 = 1, >>>>> ++ .has_usbd = 1, >>>>> ++ >>>>> ++ .has_enetsw = 1, >>>>> ++ >>>>> ++ .enetsw = { >>>>> ++ .used_ports = { >>>>> ++ [0] = { >>>>> ++ .used = 1, >>>>> ++ .phy_id = 1, >>>>> ++ .name = "Port 1", >>>>> ++ }, >>>>> ++ [1] = { >>>>> ++ .used = 1, >>>>> ++ .phy_id = 2, >>>>> ++ .name = "Port 2", >>>>> ++ }, >>>>> ++ [2] = { >>>>> ++ .used = 1, >>>>> ++ .phy_id = 3, >>>>> ++ .name = "Port 3", >>>>> ++ }, >>>>> ++ [3] = { >>>>> ++ .used = 1, >>>>> ++ .phy_id = 4, >>>>> ++ .name = "Port 4", >>>>> ++ }, >>>>> ++ }, >>>>> ++ }, >>>>> ++ >>>>> ++ .leds = { >>>>> ++ /* front LEDs */ >>>>> ++ { >>>>> ++ .name = >>>>> "F@ST2704V2:green:power", >>>>> ++ .gpio = 4, >>>>> ++ .active_low = 1, >>>>> ++ .default_trigger = "default-on", >>>>> ++ }, >>>>> ++ { >>>>> ++ .name = "F@ST2704V2 >>>>> :red:power", >>>>> ++ .gpio = 5, >>>>> ++ .active_low = 1, >>>>> ++ }, >>>>> ++ { >>>>> ++ .name = "F@ST2704V2 >>>>> :red:inet", >>>>> ++ .gpio = 2, >>>>> ++ .active_low = 1, >>>>> ++ }, >>>>> ++ { >>>>> ++ .name = "F@ST2704V2 >>>>> :green:dsl", >>>>> ++ .gpio = 3, >>>>> ++ .active_low = 1, >>>>> ++ }, >>>>> ++ { >>>>> ++ .name = "F@ST2704V2 >>>>> :green:inet", >>>>> ++ .gpio = 11, >>>>> ++ .active_low = 1, >>>>> ++ }, >>>>> ++ { >>>>> ++ .name = "F@ST2704V2 >>>>> :green:usb", >>>>> ++ .gpio = 1, >>>>> ++ .active_low = 1, >>>>> ++ }, >>>>> ++ >>>>> ++ /* side button LEDs */ >>>>> ++ { >>>>> ++ .name = "F@ST2704V2 >>>>> :green:wps", >>>>> ++ .gpio = 10, >>>>> ++ .active_low = 1, >>>>> ++ }, >>>>> ++ >>>>> ++ /* FIXME: can't control gpio0 line in "out" state, >>>>> needs >>>>> further investigation */ >>>>> ++ /* >>>>> ++ { >>>>> ++ .name = >>>>> "F@ST2704V2:green:rfkill", >>>>> ++ .gpio = 0, >>>>> ++ .active_low = 1, >>>>> ++ }, >>>>> ++ */ >>>>> ++ >>>>> ++ }, >>>>> ++ .buttons = { >>>>> ++ { >>>>> ++ .desc = "reset", >>>>> ++ .gpio = 23, >>>>> ++ .active_low = 1, >>>>> ++ .type = EV_KEY, >>>>> ++ .code = KEY_RESTART, >>>>> ++ .debounce_interval = >>>>> BCM963XX_KEYS_DEBOUNCE_INTERVAL, >>>>> ++ }, >>>>> ++ { >>>>> ++ .desc = "wps", >>>>> ++ .gpio = 24, >>>>> ++ .active_low = 1, >>>>> ++ .type = EV_KEY, >>>>> ++ .code = KEY_WPS_BUTTON, >>>>> ++ .debounce_interval = >>>>> BCM963XX_KEYS_DEBOUNCE_INTERVAL, >>>>> ++ }, >>>>> ++ { >>>>> ++ .desc = "rfkill", >>>>> ++ .gpio = 15, >>>>> ++ .active_low = 1, >>>>> ++ .type = EV_KEY, >>>>> ++ .code = KEY_WLAN, >>>>> ++ .debounce_interval = >>>>> BCM963XX_KEYS_DEBOUNCE_INTERVAL, >>>>> ++ }, >>>>> ++ }, >>>>> ++}; >>>>> ++ >>>>> + static struct board_info __initdata board_rta1025w_16 = { >>>>> + .name = "RTA1025W_16", >>>>> + .expected_cpu_id = 0x6348, >>>>> +@@ -3810,6 +3926,7 @@ static const struct board_info __initcon >>>>> + &board_963281TAN, >>>>> + &board_963281T_TEF, >>>>> + &board_dsl_274xb_f1, >>>>> ++ &board_FAST2704V2, >>>>> + #endif >>>>> + #ifdef CONFIG_BCM63XX_CPU_6338 >>>>> + &board_96338gw, >>>>> -- >>>>> 1.8.1.5 >>>>> _______________________________________________ >>>>> openwrt-devel mailing list >>>>> [email protected] >>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >>>>> >>>> >>>> >>>> >>>> _______________________________________________ >>>> openwrt-devel mailing list >>>> [email protected] >>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >>>> >>>> _______________________________________________ >> openwrt-devel mailing list >> [email protected] >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >> >> _______________________________________________ > openwrt-devel mailing list > [email protected] > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
