I found this must have been an error on my part. I cleared everythign out and re-synced. Somehow OpenWrt C Firewall had been cleared in my .config.
Sorry for the disturbance. Camden On Sun, Nov 17, 2013 at 11:24 AM, camden lindsay < [email protected]> wrote: > Hello- > Has something changed with options during build required to have the > firewall scripts in the base image? > > I built an image from trunk this morning to upgrade my router. > I am not doing anything special in make menuconfig other than setting > target system and profile. > > > But once i do an mtd write of the image, there does not appear to be any > configuration for the firewall in uci, (/etc/config) nor in startup scripts > (/etc/init.d) > > root@OpenWrt:/tmp# mtd write -r > openwrt-ar71xx-generic-wzr-hp-ag300h-squashfs-sysupgrade.bin firmware > Unlocking firmware ... > > Writing from openwrt-ar71xx-generic-wzr-hp-ag300h-squashfs-sysupgrade.bin > to firmware ... > Rebooting ... > Write failed: Broken pipe > dylan@BigBox ~ $ telnet 192.168.1.1 > Trying 192.168.1.1... > Connected to 192.168.1.1. > Escape character is '^]'. > === IMPORTANT ============================ > Use 'passwd' to set your login password > this will disable telnet and enable SSH > ------------------------------------------ > > > BusyBox v1.19.4 (2013-11-17 08:55:26 PST) built-in shell (ash) > Enter 'help' for a list of built-in commands. > > _______ ________ __ > | |.-----.-----.-----.| | | |.----.| |_ > | - || _ | -__| || | | || _|| _| > |_______|| __|_____|__|__||________||__| |____| > |__| W I R E L E S S F R E E D O M > ----------------------------------------------------- > BARRIER BREAKER (Bleeding Edge, r38840) > ----------------------------------------------------- > * 1/2 oz Galliano Pour all ingredients into > * 4 oz cold Coffee an irish coffee mug filled > * 1 1/2 oz Dark Rum with crushed ice. Stir. > * 2 tsp. Creme de Cacao > ----------------------------------------------------- > root@OpenWrt:/# uci show firewall > uci: Entry not found > root@OpenWrt:/# uci show | grep firewall > root@OpenWrt:/# > root@OpenWrt:/# ls -l /etc/config > -rw-r--r-- 1 root root 687 Nov 17 2013 6relayd > -rw-r--r-- 1 root root 885 Nov 17 2013 dhcp > -rw-r--r-- 1 root root 134 Nov 17 2013 dropbear > -rw------- 1 root root 675 Jan 1 00:00 network > -rw------- 1 root root 659 Jan 1 00:00 system > -rw------- 1 root root 115 Jan 1 00:00 ubootenv > -rw-r--r-- 1 root root 884 Jan 1 00:00 wireless > root@OpenWrt:/# > > root@OpenWrt:/# ls -l /etc/init.d/ > -rwxr-xr-x 1 root root 4096 Nov 17 2013 6relayd > -rwxr-xr-x 1 root root 1988 Nov 16 2013 boot > -rwxr-xr-x 1 root root 418 Nov 17 2013 cron > -rwxr-xr-x 1 root root 318 May 14 2013 defconfig > -rwxr-xr-x 1 root root 13151 Nov 17 2013 dnsmasq > -rwxr-xr-x 1 root root 308 May 14 2013 done > -rwxr-xr-x 1 root root 3920 Nov 17 2013 dropbear > -rwxr-xr-x 1 root root 2015 May 14 2013 led > -rwxr-xr-x 1 root root 1389 Nov 17 2013 log > -rwxr-xr-x 1 root root 729 Nov 16 2013 network > -rwxr-xr-x 1 root root 126 May 14 2013 sysctl > -rwxr-xr-x 1 root root 742 Nov 17 2013 sysntpd > -rwxr-xr-x 1 root root 926 Nov 17 2013 telnet > -rwxr-xr-x 1 root root 102 May 14 2013 umount > root@OpenWrt:/# > > What am I missing? > > Thank you > Camden >
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
