Thank you for the pointers. c
On Tue, Nov 26, 2013 at 3:40 PM, Weedy <[email protected]> wrote: > After using OpenWRT for years with almost 0 issues this is my workflow. > > weedy@HAF ~/projects/openwrt $ svn up . && make V=3 package/symlinks > weedy@HAF ~/projects/openwrt $ cat configs/tl-wdr4300-home.config > CONFIG_TARGET_ar71xx=y > CONFIG_TARGET_ar71xx_generic=y > CONFIG_TARGET_ar71xx_generic_TLWDR4300=y > weedy@HAF ~/projects/openwrt $ cat configs/base-no-LUCI.config > CONFIG_PACKAGE_bmon=y > CONFIG_PACKAGE_darkstat=y > CONFIG_PACKAGE_ddns-scripts=y > CONFIG_PACKAGE_iftop=y > CONFIG_PACKAGE_iperf=y > CONFIG_PACKAGE_iptables-mod-conntrack-extra=y > CONFIG_PACKAGE_iwinfo=y > CONFIG_PACKAGE_kmod-ipt-conntrack-extra=y > CONFIG_PACKAGE_miniupnpd=y > CONFIG_PACKAGE_muninlite=y > CONFIG_PACKAGE_qos-scripts=y > CONFIG_PACKAGE_screen=y > CONFIG_PACKAGE_tcpdump=y > CONFIG_PACKAGE_uhttpd=y > CONFIG_PACKAGE_wpad=y > weedy@HAF ~/projects/openwrt $ cp -p configs/tl-wdr4300-home.config > .config > weedy@HAF ~/projects/openwrt $ cat configs/base-no-LUCI.config >> .config > weedy@HAF ~/projects/openwrt $ make V=99 defconfig && nice -n 15 make V=s > -j2 > > Forcing deps to be resolved every time I update SVN has removed all "well > shit" moments from updates. > You can add a "make V=99 oldconfig" after the package/symlinks if you want > to see changes, but normally skimming over the svn output is enough to keep > on top of things. > > Your "seed config" should be top level changes only. Do not add deps, just > the packages you want in the final image. jow/mbm/nbd have done a very good > job of making the build system resolve deps. > > Hope this makes your life easier. > > On Mon, Nov 18, 2013 at 7:55 PM, camden lindsay < > [email protected]> wrote: > >> I found this must have been an error on my part. >> I cleared everythign out and re-synced. >> Somehow OpenWrt C Firewall had been cleared in my .config. >> >> Sorry for the disturbance. >> Camden >> >> >> On Sun, Nov 17, 2013 at 11:24 AM, camden lindsay < >> [email protected]> wrote: >> >>> Hello- >>> Has something changed with options during build required to have the >>> firewall scripts in the base image? >>> >>> I built an image from trunk this morning to upgrade my router. >>> I am not doing anything special in make menuconfig other than setting >>> target system and profile. >>> >>> >>> But once i do an mtd write of the image, there does not appear to be any >>> configuration for the firewall in uci, (/etc/config) nor in startup scripts >>> (/etc/init.d) >>> >>> root@OpenWrt:/tmp# mtd write -r >>> openwrt-ar71xx-generic-wzr-hp-ag300h-squashfs-sysupgrade.bin firmware >>> Unlocking firmware ... >>> >>> Writing from >>> openwrt-ar71xx-generic-wzr-hp-ag300h-squashfs-sysupgrade.bin to firmware ... >>> Rebooting ... >>> Write failed: Broken pipe >>> dylan@BigBox ~ $ telnet 192.168.1.1 >>> Trying 192.168.1.1... >>> Connected to 192.168.1.1. >>> Escape character is '^]'. >>> === IMPORTANT ============================ >>> Use 'passwd' to set your login password >>> this will disable telnet and enable SSH >>> ------------------------------------------ >>> >>> >>> BusyBox v1.19.4 (2013-11-17 08:55:26 PST) built-in shell (ash) >>> Enter 'help' for a list of built-in commands. >>> >>> _______ ________ __ >>> | |.-----.-----.-----.| | | |.----.| |_ >>> | - || _ | -__| || | | || _|| _| >>> |_______|| __|_____|__|__||________||__| |____| >>> |__| W I R E L E S S F R E E D O M >>> ----------------------------------------------------- >>> BARRIER BREAKER (Bleeding Edge, r38840) >>> ----------------------------------------------------- >>> * 1/2 oz Galliano Pour all ingredients into >>> * 4 oz cold Coffee an irish coffee mug filled >>> * 1 1/2 oz Dark Rum with crushed ice. Stir. >>> * 2 tsp. Creme de Cacao >>> ----------------------------------------------------- >>> root@OpenWrt:/# uci show firewall >>> uci: Entry not found >>> root@OpenWrt:/# uci show | grep firewall >>> root@OpenWrt:/# >>> root@OpenWrt:/# ls -l /etc/config >>> -rw-r--r-- 1 root root 687 Nov 17 2013 6relayd >>> -rw-r--r-- 1 root root 885 Nov 17 2013 dhcp >>> -rw-r--r-- 1 root root 134 Nov 17 2013 dropbear >>> -rw------- 1 root root 675 Jan 1 00:00 network >>> -rw------- 1 root root 659 Jan 1 00:00 system >>> -rw------- 1 root root 115 Jan 1 00:00 ubootenv >>> -rw-r--r-- 1 root root 884 Jan 1 00:00 wireless >>> root@OpenWrt:/# >>> >>> root@OpenWrt:/# ls -l /etc/init.d/ >>> -rwxr-xr-x 1 root root 4096 Nov 17 2013 6relayd >>> -rwxr-xr-x 1 root root 1988 Nov 16 2013 boot >>> -rwxr-xr-x 1 root root 418 Nov 17 2013 cron >>> -rwxr-xr-x 1 root root 318 May 14 2013 defconfig >>> -rwxr-xr-x 1 root root 13151 Nov 17 2013 dnsmasq >>> -rwxr-xr-x 1 root root 308 May 14 2013 done >>> -rwxr-xr-x 1 root root 3920 Nov 17 2013 dropbear >>> -rwxr-xr-x 1 root root 2015 May 14 2013 led >>> -rwxr-xr-x 1 root root 1389 Nov 17 2013 log >>> -rwxr-xr-x 1 root root 729 Nov 16 2013 network >>> -rwxr-xr-x 1 root root 126 May 14 2013 sysctl >>> -rwxr-xr-x 1 root root 742 Nov 17 2013 sysntpd >>> -rwxr-xr-x 1 root root 926 Nov 17 2013 telnet >>> -rwxr-xr-x 1 root root 102 May 14 2013 umount >>> root@OpenWrt:/# >>> >>> What am I missing? >>> >>> Thank you >>> Camden >>> >> >> >> _______________________________________________ >> openwrt-devel mailing list >> [email protected] >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >> >> > > _______________________________________________ > openwrt-devel mailing list > [email protected] > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > >
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
