On 21 April 2014 11:05, John Crispin <[email protected]> wrote: > > > On 21/04/2014 05:18, Claudio Leite wrote: >> The Airlink101 AR725W is a RT2880 router with 32MB RAM, 4MB flash, >> 100mbit IP175E switch and dual-band 802.11n wireless. >> >> Notes: - I couldn't get the switch to be recognized without >> building it into the kernel, rather than as a module. Since the >> driver has it attached to the ethernet port, it needs(?) to be >> present when the eth device is probed. > > adding the phy driver to the kernel config is the correct approach
Which leads to larger kernel for all devices even without that switch and those which have other switches. I think this was discussed before. The boards with rtl8366xx don't have them explicitly enabled in target kernel config, all is done via kernel package. Correct me if I'm wrong? Regards, Roman _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
