On 16/05/14 21:50, Mikko Hissa wrote:
On 16 May 2014, at 14:18, Daniel Petre <[email protected]
<mailto:[email protected]>> wrote:
Hello,
Hi!
anyone has any idea about the fix for the wireless of d-link dir-615 h1 ?
In rt2800lib.c, remove line 7812:
if (rt2x00_rt(rt2x00dev, RT3290) ||
*- rt2x00_rt(rt2x00dev, RT3352) ||*
rt2x00_rt(rt2x00dev, RT5390) ||
rt2x00_rt(rt2x00dev, RT5392))
(You’ll find it
in
build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/linux-ramips_rt305x/compat-wireless-2014-03-31/drivers/net/wireless/rt2x00)
Just do make without a clean and it’ll work.
There still are some problems with rt2x00 not limited to rt3352 (slow rx
etc.)…
Thanks, i managed to get a H2 to test (again), the fix worked and i get
stable 30 Mbit/s download and around 15 Mbit/s upload.
https://dev.openwrt.org/ticket/16406
I just tried r40772 after a make clean and still no wireless:
rt2800_wmac 10180000.wmac: failed to load eeprom property
ieee80211 phy0: rt2x00lib_request_eeprom_file: Info - Loading EEPROM
data from 'soc_wmac.eeprom'.
ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3352, rev 0200 detected
ieee80211 phy0: rt2800_init_eeprom: Error - Invalid RF chipset 0x3352
detected
ieee80211 phy0: rt2x00lib_probe_dev: Error - Failed to allocate device
thanks!
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
