2014-06-03 21:35 GMT+02:00, John Crispin <[email protected]>: > Thanks, > > does ath5k work after applying this patch ? i dont have any hw to test > with ... > > John > The ath5k driver using an ARV4518PW works as good as always, at least for me, and the wireless MAC is read correctly.
[ 0.300000] ath5k,eeprom 103f0400.ath5k_eep: loaded ath5k eeprom ... [ 10.572000] PCI: Enabling device 0000:00:0e.0 (0000 -> 0002) [ 10.576000] ath5k 0000:00:0e.0: registered as 'phy0' [ 10.588000] ath: EEPROM regdomain: 0x60 [ 10.592000] ath: EEPROM indicates we should expect a direct regpair map [ 10.596000] ath: Country alpha2 being used: 00 [ 10.600000] ath: Regpair used: 0x60 [ 10.608000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 10.624000] ath5k: phy0: Atheros AR2417 chip found (MAC: 0xf0, PHY: 0x70) ... [ 24.668000] wlan0: authenticate with 64:70:02: [ 24.680000] wlan0: send auth to 64:70:02: (try 1/3) [ 24.684000] wlan0: authenticated [ 24.692000] wlan0: associate with 64:70:02: (try 1/3) [ 24.700000] wlan0: RX AssocResp from 64:70:02: (capab=0x431 status=0 aid=1) [ 24.708000] wlan0: associated But as you say will be better if the patch can be tested in other boards, especially the sx762. Pepe _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
