On 04/06/2014 00:04, José Vázquez wrote:
> 2014-06-03 21:35 GMT+02:00, John Crispin <[email protected]>:
>> Thanks,
>>
>> does ath5k work after applying this patch ? i dont have any hw to
>> test with ...
>>
>> John
>>
> The ath5k driver using an ARV4518PW works as good as always, at
> least for me, and the wireless MAC is read correctly.
ok, thanks for testing i will merge the patch today
John
>
> [ 0.300000] ath5k,eeprom 103f0400.ath5k_eep: loaded ath5k
> eeprom ... [ 10.572000] PCI: Enabling device 0000:00:0e.0 (0000
> -> 0002) [ 10.576000] ath5k 0000:00:0e.0: registered as 'phy0' [
> 10.588000] ath: EEPROM regdomain: 0x60 [ 10.592000] ath: EEPROM
> indicates we should expect a direct regpair map [ 10.596000] ath:
> Country alpha2 being used: 00 [ 10.600000] ath: Regpair used:
> 0x60 [ 10.608000] ieee80211 phy0: Selected rate control algorithm
> 'minstrel_ht' [ 10.624000] ath5k: phy0: Atheros AR2417 chip found
> (MAC: 0xf0, PHY: 0x70) ... [ 24.668000] wlan0: authenticate with
> 64:70:02: [ 24.680000] wlan0: send auth to 64:70:02: (try 1/3) [
> 24.684000] wlan0: authenticated [ 24.692000] wlan0: associate
> with 64:70:02: (try 1/3) [ 24.700000] wlan0: RX AssocResp from
> 64:70:02: (capab=0x431 status=0 aid=1) [ 24.708000] wlan0:
> associated
>
> But as you say will be better if the patch can be tested in other
> boards, especially the sx762.
>
> Pepe _______________________________________________ openwrt-devel
> mailing list [email protected]
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
