Remove parentheses around return values since return is no a function,
as suggested by checkpatch.

Signed-off-by: Sergey Ryazanov <[email protected]>
---
 target/linux/atheros/patches-3.10/100-board.patch           |  2 +-
 target/linux/atheros/patches-3.10/105-ar2315_pci.patch      |  2 +-
 target/linux/atheros/patches-3.10/110-ar2313_ethernet.patch | 12 ++++++------
 3 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/target/linux/atheros/patches-3.10/100-board.patch 
b/target/linux/atheros/patches-3.10/100-board.patch
index 4f7b072..0bd3410 100644
--- a/target/linux/atheros/patches-3.10/100-board.patch
+++ b/target/linux/atheros/patches-3.10/100-board.patch
@@ -661,7 +661,7 @@
 +
 +/* Returns gpio for IRQ attached.  Unchecked function */
 +static inline int irq_to_gpio(unsigned irq) {
-+      return (irq - (AR531X_GPIO_IRQ(0)));
++      return irq - AR531X_GPIO_IRQ(0);
 +}
 +
 +#include <asm-generic/gpio.h> /* cansleep wrappers */
diff --git a/target/linux/atheros/patches-3.10/105-ar2315_pci.patch 
b/target/linux/atheros/patches-3.10/105-ar2315_pci.patch
index 7c72a8e..3e51848 100644
--- a/target/linux/atheros/patches-3.10/105-ar2315_pci.patch
+++ b/target/linux/atheros/patches-3.10/105-ar2315_pci.patch
@@ -95,7 +95,7 @@
 +      ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, AR2315_PCIMISC_CFG_SEL, 0);
 +      local_irq_restore(flags);
 +
-+      return (err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL);
++      return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
 +}
 +
 +static int ar231x_pci_read(struct pci_bus *bus, unsigned int devfn, int 
where, int size, u32 * value)
diff --git a/target/linux/atheros/patches-3.10/110-ar2313_ethernet.patch 
b/target/linux/atheros/patches-3.10/110-ar2313_ethernet.patch
index e3773e3..b9a56b7 100644
--- a/target/linux/atheros/patches-3.10/110-ar2313_ethernet.patch
+++ b/target/linux/atheros/patches-3.10/110-ar2313_ethernet.patch
@@ -262,7 +262,7 @@
 +              ioremap_nocache(virt_to_phys(ar_eth_base), 
sizeof(*sp->eth_regs));
 +      if (!sp->eth_regs) {
 +              printk("Can't remap eth registers\n");
-+              return (-ENXIO);
++              return -ENXIO;
 +      }
 +
 +      /**
@@ -278,7 +278,7 @@
 +                                                      sizeof(*sp->phy_regs));
 +              if (!sp->phy_regs) {
 +                      printk("Can't remap phy registers\n");
-+                      return (-ENXIO);
++                      return -ENXIO;
 +              }
 +      }
 +
@@ -288,13 +288,13 @@
 +      dev->base_addr = (unsigned int) sp->dma_regs;
 +      if (!sp->dma_regs) {
 +              printk("Can't remap DMA registers\n");
-+              return (-ENXIO);
++              return -ENXIO;
 +      }
 +
 +      sp->int_regs = ioremap_nocache(virt_to_phys(sp->cfg->reset_base), 4);
 +      if (!sp->int_regs) {
 +              printk("Can't remap INTERRUPT registers\n");
-+              return (-ENXIO);
++              return -ENXIO;
 +      }
 +
 +      strncpy(sp->name, "Atheros AR231x", sizeof(sp->name) - 1);
@@ -667,7 +667,7 @@
 +
 +      mdelay(10);
 +
-+      return (0);
++      return 0;
 +}
 +
 +
@@ -1218,7 +1218,7 @@
 +
 +      ethernet->mii_addr = MII_ADDR(phy_addr, regnum);
 +      while (ethernet->mii_addr & MII_ADDR_BUSY);
-+      return (ethernet->mii_data >> MII_DATA_SHIFT);
++      return ethernet->mii_data >> MII_DATA_SHIFT;
 +}
 +
 +static int
-- 
1.8.1.5
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel

Reply via email to