Use msleep(20) instead of msleep(10) to make code closer to reality since msleep can sleep for up to 20ms even we request shorter delay. All updated calls are located in PCI initialization routine which is called only once upon device boot. So there should be no performance issues caused by more longer delay.
Signed-off-by: Sergey Ryazanov <[email protected]> --- target/linux/atheros/patches-3.10/105-ar2315_pci.patch | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/linux/atheros/patches-3.10/105-ar2315_pci.patch b/target/linux/atheros/patches-3.10/105-ar2315_pci.patch index 7a9714f..7108d6c 100644 --- a/target/linux/atheros/patches-3.10/105-ar2315_pci.patch +++ b/target/linux/atheros/patches-3.10/105-ar2315_pci.patch @@ -198,11 +198,11 @@ + set_io_port_base(ar231x_pci_controller.io_map_base); /* PCI I/O space*/ + + reg = ar231x_mask_reg(AR2315_RESET, 0, AR2315_RESET_PCIDMA); -+ msleep(10); ++ msleep(20); + + reg &= ~AR2315_RESET_PCIDMA; + ar231x_write_reg(AR2315_RESET, reg); -+ msleep(10); ++ msleep(20); + + ar231x_mask_reg(AR2315_ENDIAN_CTL, 0, + AR2315_CONFIG_PCIAHB | AR2315_CONFIG_PCIAHB_BRIDGE); -- 1.8.1.5 _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
