On 7/1/14, 10:04 AM, Jacek Kikiewicz wrote: > Hello, > > I have few APs that are using ath9k driver, I've read that now DFS is > supported on that driver, > so I compiled latest revision (yesterday: 41415), and started playing, > basically when as per > manual / howto I run 'iw phy phy1 info' I can see DFS channels, exactly like > in howto on a wiki, problem is however > that I cannot make it work on those channels (I've tried 52,56,100, 104), > after changing config and restarting wifi > I saw in dmesg 'interface wlan1 entered disabled mode) - I tried with HT20 > for the beginning. > So, question here is, should this work in current state or is there still > some support missing? > I can pull any logs / settings that are of interest.
Have you elected CONFIG_PACKAGE_ATH_DFS=y when compiling the driver? This way you agree to the fact that your hardware supports DFS. After that DFS channels can be selected. Martin > > Thanks! > Jacek > _______________________________________________ > openwrt-devel mailing list > [email protected] > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
