Hi,
I sure selected this option, as I said command 'iw phy phy1 info' does
in fact show DFS channels, but I just cannot set them for usage...
Jacek
On 07/02/14 22:50, Martin Garbe wrote:
On 7/1/14, 10:04 AM, Jacek Kikiewicz wrote:
Hello,
I have few APs that are using ath9k driver, I've read that now DFS is supported
on that driver,
so I compiled latest revision (yesterday: 41415), and started playing,
basically when as per
manual / howto I run 'iw phy phy1 info' I can see DFS channels, exactly like in
howto on a wiki, problem is however
that I cannot make it work on those channels (I've tried 52,56,100, 104), after
changing config and restarting wifi
I saw in dmesg 'interface wlan1 entered disabled mode) - I tried with HT20 for
the beginning.
So, question here is, should this work in current state or is there still some
support missing?
I can pull any logs / settings that are of interest.
Have you elected
CONFIG_PACKAGE_ATH_DFS=y
when compiling the driver? This way you agree to the fact that your
hardware supports DFS. After that DFS channels can be selected.
Martin
Thanks!
Jacek
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
