Hi,

This serie aims at finally fixing the already supported mvebu boards
images, since none of them actually work on the boards except for the
WRT1900AC.

This is the follow-up of two previous attempts at doing that:
https://lists.openwrt.org/pipermail/openwrt-devel/2014-October/028593.html
https://lists.openwrt.org/pipermail/openwrt-devel/2014-December/029899.html

This one, yet another approach has been taken, similar to the one used
for the ar71xx, where each profiles are split in a various number of
subprofiles (1-X), each subprofile representing a combination of a DT
name and its associated UBI options.

It builds up on that to then introduce support for two Armada
385-based evaluations boards from Marvell.

Let me know what you think,
Maxime

Maxime Ripard (9):
  mvebu: Replace the padjffs2 call by the generic definition
  mvebu: Switch to the generic mkuimage macro
  kernel: Allow ubi autoattach to run on NOR flash
  mvebu: Add sub-profiles
  mvebu: Add NOR sub-profile implementation
  mvebu: Fix NAND and NOR options
  mvebu: Switch to 3.18
  mvebu: Add the Armada 385 Reference Design support
  mvebu: Add Armada 385 DB AP support

 ...tach-mtd-device-named-ubi-or-data-on-boot.patch |   5 +-
 ...tach-mtd-device-named-ubi-or-data-on-boot.patch |   5 +-
 ...tach-mtd-device-named-ubi-or-data-on-boot.patch |   5 +-
 target/linux/mvebu/Makefile                        |   2 +-
 target/linux/mvebu/image/Makefile                  | 137 ++++++++++---
 ...nctrl-mvebu-a38x-Add-UART1-muxing-options.patch |  43 ++++
 .../013-ARM-mvebu-a38x-Fix-node-names.patch        |  98 +++++++++
 ...M-mvebu-Add-a-number-of-pinctrl-functions.patch |  70 +++++++
 ...dd-Armada-385-Access-Point-Development-Bo.patch | 220 +++++++++++++++++++++
 ...-mvebu-A385-AP-Enable-the-NAND-controller.patch |  39 ++++
 .../020-armada-385-rd-mtd-partitions.patch         |  24 +++
 .../021-ARM-mvebu-385-ap-Add-partitions.patch      |  39 ++++
 12 files changed, 652 insertions(+), 35 deletions(-)
 create mode 100644 
target/linux/mvebu/patches-3.18/012-pinctrl-mvebu-a38x-Add-UART1-muxing-options.patch
 create mode 100644 
target/linux/mvebu/patches-3.18/013-ARM-mvebu-a38x-Fix-node-names.patch
 create mode 100644 
target/linux/mvebu/patches-3.18/014-ARM-mvebu-Add-a-number-of-pinctrl-functions.patch
 create mode 100644 
target/linux/mvebu/patches-3.18/015-ARM-mvebu-Add-Armada-385-Access-Point-Development-Bo.patch
 create mode 100644 
target/linux/mvebu/patches-3.18/016-ARM-mvebu-A385-AP-Enable-the-NAND-controller.patch
 create mode 100644 
target/linux/mvebu/patches-3.18/020-armada-385-rd-mtd-partitions.patch
 create mode 100644 
target/linux/mvebu/patches-3.18/021-ARM-mvebu-385-ap-Add-partitions.patch

-- 
2.2.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel

Reply via email to