PCI works, I have one more issue (present from 3.14 kernel) , unit will
hang (without any errors in console output) when trying to reboot from
cli/luci, but only when dsl_control is started at boot, without attached
line or with dsl_control excluded from running on boot, everything
works ok, even trying to stop dsl_control before reboot doesn't help.
I'm thinking that dts for P-2812HNU has something to do with it, but I
cannot trace it.
W dniu 2015-02-12 o 18:38, John Crispin pisze:
On 12/02/2015 18:33, John Crispin wrote:
On 12/02/2015 18:30, Daniel Gimpelevich wrote:
On Thu, Feb 12, 2015 at 8:54 AM, Daniel Gimpelevich
<[email protected]
<mailto:[email protected]>> wrote:
On Thu, Feb 12, 2015 at 3:19 AM, John Crispin
<[email protected] <mailto:[email protected]>> wrote:
On 10/02/2015 10:40, Daniel Gimpelevich wrote:
Is there a patchset I could try?
try r44421 or newer
Tried initramfs, bootlog attached.
With this image, booting from SPI flash still fails, because
there is no longer a "kernel" partition, so the rootfs is now
/dev/mtdblock4, while the DTS file still specifies
/dev/mtdblock5.
and why does that cause booting to fail ?
ah i see, not even sure why we attach that info. the mtdsplid should
automatically set the root=
try removing the root= parameter please and see if it boots properly
_______________________________________________ openwrt-devel
mailing list [email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
