On Tue, 2015-02-17 at 15:36 +0100, John Crispin wrote: > > On 16/02/2015 21:47, Paul Blazejowski wrote: > > On Mon, 2015-02-16 at 08:10 +0100, John Crispin wrote: > >> > >> On 16/02/2015 00:15, Paul Blazejowski wrote: > >>> 00 KHz AUTO), (N/A, 2000 mBm), (0 s) > >>> [ 21.730000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), > >>> (N/A, 2000 mBm), (0 s) > >>> [ 21.740000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), > >>> (N/A, 2000 mBm), (N/A) > >>> [ 21.750000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), > >>> (N/A, 0 mBm), (N/A) > >>> [ 22.170000] ath9k ar934x_wmac: Direct firmware load for > >>> soc_wmac.eeprom failed with error -2 > >>> [ 22.180000] ath: phy0: Unable to load EEPROM file soc_wmac.eeprom > >>> [ 22.190000] ath9k ar934x_wmac: failed to initialize device > >>> [ 22.190000] ath9k: probe of ar934x_wmac failed with error -22 > >>> [ 22.200000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002) > >>> [ 22.220000] ath9k 0000:00:00.0: Direct firmware load for > >>> pci_wmac0.eeprom failed with error -2 > >>> [ 22.230000] ath: phy1: Unable to load EEPROM file pci_wmac0.eeprom > >>> [ 22.230000] ath9k 0000:00:00.0: Failed to initialize device > >>> [ 22.240000] ath9k: probe of 0000:00:00.0 failed with error -22 > >>> [ 29.760000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready > >> > >> probably related to this -> https://dev.openwrt.org/ticket/18992 > >> > >> do a "cat /tmp/sysinfo/*" please > > > > nope sir, just replied to your other mail...but here it is again: > > > > root@router:~# cat /tmp/sysinfo/* > > wndr3700v4 > > NETGEAR WNDR3700v4 > > > > the firmware loader was not enabled in 3.18 and 3.19. r44481 fixes this. > it is now working as expected on my wndr4300 > > i also decided to set 3.18 as the default as this was the only issue > that was reported. > > thanks for testing, > John
Hi John, the router has been up for over 2 hours and all is working OK here as well. Thank you for resolving this issue, -paul _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
