On Tue, Apr 28, 2015 at 5:15 AM, Christian Mehlis <christ...@m3hlis.de> wrote: > Am 27.04.2015 um 20:56 schrieb Heiner Kallweit: >> >> The only other difference I found is the initial setting of LED_CTRL3 >> register. >> Could you please test the following patch (first remove the initial patch >> attempt)? > > > [ 0.850000] switch0: Atheros AR833X rev. 2 switch registered on > ag71xx-mdio.0 > [ 0.860000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: led_val = 3f > [ 0.860000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Detected > AR8337 > > It seems that we have no luck here... > In case you have any new idea I'll test the patch.
Here's some general info about the QCA8334 chip that might help. If you have specific questions let me know and I will try to find answers. The four ports of the Gigabit switch engine are: Port 0 GMAC: RGMII/MII/RMII Port 2 and 3 GMAC: 2 *10/100/1000BASE-T Port 6 GMAC: SerDes/SGMII It can be configured using serial EEPROM and/or the MDC/MDIO interface. kg _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel