Am 28.04.2015 um 22:10 schrieb Heiner Kallweit:
It was easier than I thought, here comes the related patch.
Known limitations:
1. The patch supports configuration of this bit for platform-data-configured
platforms only. DT-based platforms would need a similar extension.
2. For now it's for WPJ344 only. Every other AR8334-based device would need the
same
extension to the platform data.
Rgds, Heiner
Hi Heiner,
this explicit way to talk to the driver is working!
Thank you for your effort!
Tested-By: Christian Mehlis <christ...@m3hlis.de>
##########################################################
Perhaps you know the answer to my last problem with this hardware too:
On plug/unplug I get those events:
[ 25.120000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 2 is up
[ 37.130000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:00: Port 2 is down
but the linux network stack is keeping the interface UP.
config interface 'wan'
option ifname 'eth0.2'
option proto 'dhcp'
config switch
option name 'switch0'
option reset '1'
option enable_vlan '1'
config switch_vlan
option device 'switch0'
option vlan '1'
option ports '0t 3'
config switch_vlan
option device 'switch0'
option vlan '2'
option ports '0t 2'
I have never had this behaviour on other platforms...do you think the
compex-344 specific initialization is done wrong?
#########################################################
Best
Christian
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
