Hi Arjen, I've reverted the commit for now. Another approach might be to use mtdconcat and set it up from the mach file.
Thanks, - Felix On 2016-01-22 20:11, Arjen de Korte wrote: > This doesn't look good. This patch will move the location of the > 'caldata_backup' partition from the factory default location > > 0x000001fc0000-0x000002000000 : "caldata_backup" > > to > > 0x000007fc0000-0x000008000000 : "caldata_backup" > > But since the data of this partition is not moved beforehand, the > previous location will be overwritten by the larger "firmware" > partition and the new location will probably contain nothing but FF. > While I agree it is a waste to not use the 96 MB in location > 0x000002000000-0x000008000000, just moving the "caldata_backup" > partition to a new location and hope for the best is not a good > solution. > > Regards, Arjen > > Citeren [email protected]: > >> Author: nbd >> Date: 2016-01-17 12:16:56 +0100 (Sun, 17 Jan 2016) >> New Revision: 48276 >> >> Modified: >> trunk/target/linux/ar71xx/image/Makefile >> Log: >> ar71xx: Use full 128MB flash on Netgear WNDR4300 and WNDR3700v4 >> >> Change MTD on WNDR4300 and WNDR3700v4 to fully utilize the 128MB flash. >> >> Credit to @Tuochenlyu on GitHub. >> >> Signed-off-by: Chris Marchesi <[email protected]> >> >> Modified: trunk/target/linux/ar71xx/image/Makefile >> =================================================================== >> --- trunk/target/linux/ar71xx/image/Makefile 2016-01-17 11:16:52 UTC >> (rev 48275) >> +++ trunk/target/linux/ar71xx/image/Makefile 2016-01-17 11:16:56 UTC >> (rev 48276) >> @@ -1581,7 +1581,7 @@ >> >> wnr2000v4_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,3776k(firmware),64k(art)ro >> >> r6100_mtdlayout=mtdparts=ar934x-nfc:128k(u-boot)ro,256k(caldata),256k(caldata-backup),512k(config),512k(pot),2048k(kernel),122240k(ubi),25600k@0x1a0000(firmware),2048k(language),3072k(traffic_meter) >> >> tew823dru_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,15296k(firmware),192k(lang)ro,512k(my-dlink)ro,64k(mac)ro,64k(art)ro >> -wndr4300_mtdlayout=mtdparts=ar934x-nfc:256k(u-boot)ro,256k(u-boot-env)ro,256k(caldata),512k(pot),2048k(language),512k(config),3072k(traffic_meter),2048k(kernel),23552k(ubi),25600k@0x6c0000(firmware),256k(caldata_backup),-(reserved) >> +wndr4300_mtdlayout=mtdparts=ar934x-nfc:256k(u-boot)ro,256k(u-boot-env)ro,256k(caldata),512k(pot),2048k(language),512k(config),3072k(traffic_meter),2048k(kernel),120832k(ubi),122880k@0x6c0000(firmware),256k(caldata_backup),-(reserved) >> >> zcn1523h_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6208k(rootfs),1472k(kernel),64k(configure)ro,64k(mfg)ro,64k(art)ro,7680k@0x50000(firmware) >> >> mynet_n600_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro >> >> mynet_rext_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,7808k(firmware),64k(nvram)ro,64k(ART)ro >> _______________________________________________ >> openwrt-commits mailing list >> [email protected] >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-commits > _______________________________________________ > openwrt-devel mailing list > [email protected] > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
