On 04/03/2016 16:42, alzhao wrote: > Hi john, > can you specify which patch? I want to check. > On Fri, 4 Mar 2016 at 23:34, John Crispin <[email protected] > <mailto:[email protected]>> wrote: > > > > On 04/03/2016 15:07, alzhao wrote: > > Did you develop the board by yourself? Generally this is a hardware > > problem, like wrong resistors. After the system boot the USB cannot > > supply enough power to the drive. > > > > > > On Fri, 4 Mar 2016 at 21:57, Baptiste Clenet <[email protected] > <mailto:[email protected]> > > <mailto:[email protected] <mailto:[email protected]>>> wrote: > > > > Hi, > > > > I run OpenWRT on a mt7688 board, if I plug a pendrive before > the boot, > > it is detected and I can store data on it. However, after the > board > > has finished booting, if I plug the pendrive, I can't detect > it, the > > LED on the pendrive switch on and off after a 1/2 sec. > > Should I include something else to make hotplug work? > > root@OpenWrt:/# lsmod | grep usb > > btintel 1209 1 btusb > > btusb 26816 0 > > ledtrig_usbdev 1936 0 > > nls_base 5008 1 usbcore > > scsi_mod 90601 2 usb_storage > > usb_common 1740 1 usbcore > > usb_storage 37407 0 > > usbcore 117268 7 btusb > > > > > > -- > > Baptiste > > _______________________________________________ > > openwrt-devel mailing list > > [email protected] > <mailto:[email protected]> > <mailto:[email protected] > <mailto:[email protected]>> > > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > > > > what revision of openwrt do you use ? i recently pushed a patch that > fixes a phy reset problem causing usb2.0 devices to not work properly >
please don't top post and use HEAD revision or check the git log please _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
