On 16/03/2016 14:25, Baptiste Clenet wrote: > 2016-03-07 15:19 GMT+01:00 John Crispin <[email protected]>: >> >> >> On 07/03/2016 15:00, Baptiste Clenet wrote: >>> 2016-03-07 9:51 GMT+01:00 John Crispin <[email protected]>: >>>> >>>> >>>> On 07/03/2016 09:47, Baptiste Clenet wrote: >>>>> 2016-03-04 18:24 GMT+01:00 John Crispin <[email protected]>: >>>>>> >>>>>> >>>>>> On 04/03/2016 17:50, Baptiste Clenet wrote: >>>>>>> We don't use the current tree but a version from November. >>>>>>> You're talking about this changeset: >>>>>>> https://dev.openwrt.org/changeset/48749 >>>>>>> >>>>>>> I will apply it and let you know if it is better. >>>>>>> >>>>>>>>>>> >>>>>> >>>>>> >>>>>> yep, try adding that one please and see if that fixes the issue >>>>>> _______________________________________________ >>>>>> openwrt-devel mailing list >>>>>> [email protected] >>>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >>>>> >>>>> John, I chose Default profile for mt7688 board and it has built an >>>>> image named "openwrt-ramips-mt7688-LinkIt7688-squashfs-sysupgrade.bin", >>>>> so it used the LINKIT7688 dts instead of MT7628 dts. >>>>> >>>>> Concerning USB, I see the same behaviour, if the pendrive is plugged >>>>> between the boot, it works and I can plug it in and out as much as I >>>>> can, however, it the board boots and then I insert the pendrive, it is >>>>> not detected (the pendrive's led switches on for 1/2sec and then >>>>> switches off. >>>> >>>> seen this before while building pcbs .. so my money is on the following >>>> theory: your power supply is failing to provide enough current quickly >>>> enough for the USB to come up causing OC protection or similar to shut >>>> it down. check your supply voltage of the usb port with a scope and you >>>> will probably see it breakdown after that 1/2 s >>> >>> Yes it was a hardware problem effectively, I added a protection chip >>> which did not work properly and caused the pendrive not to be >>> detected. I removed it and it works, so I will dig into the hardware >>> problem. >>> Thanks >> >> we are a software project so awesome we can even remote debug hardware >> problems :-) >> >> >>>> >>>> >>>> >>>> >>>>> Second question; I see you added the mt76 wifi driver which is great! >>>>> Thank you for your work. I see the module added on the board, how may >>>>> I up the wifi? (I didn't find any readme on github [1]) >>>> >>>> its a normal mac80211 based wifi so use the normal method. you will need >>>> to add a eeprom offset to the dts file. either figure it out yourself >>>> (look at how mt7620 based boards do it) or wait a few days till i had >>>> time to update the lks7688 profile. > > John, have you had time to update mt7688 board for wifi setup? >
let me check the commit log for you ... ... nope i cant find a commit that adds the support ;) i hope to have time start of next week. >>>> >>> I let you do the edits and I will try as soon as you've done it. >>> Thanks for your help >> >> ok > > > _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
