On Wed, 11 Oct 2017 14:53:16 +0300 Sergey Ryazanov <[email protected]> wrote:
> Ok. At least we know now that the switch functioning (even without a > dedicated driver). One question left: what happens to the Ethernet > driver? > > Can you boot your router in failsafe mode again, and try to toggle > eth0 down/up? E.g.: > # ifconfig eth0 down > # ifconfig eth0 up root@(none):/# ifconfig eth0 down [ 42.063281] eth0: link down root@(none):/# ifconfig eth0 up [ 49.665365] eth0: link up, speed 100 Mb/s, full duplex root@(none):/# ifconfig eth0 down [ 62.063281] eth0: link down root@(none):/# ifconfig eth0 up [ 68.295374] eth0: link up, speed 100 Mb/s, full duplex ping stops replying after down and replies after up. > To figure out, is taking down the interface enough to break it, or > something else happened during the initialization, what prevent us to > bring it up again. Regards, Nerijus _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
