On Wed, 11 Oct 2017 18:53:40 +0300 Sergey Ryazanov <ryazanov....@gmail.com> wrote:
> A-ha! The interface survives the down/up circle but does not survive > the init procedure. > > Try to completely avoid bridge usage, e.g.: > 1. boot in normal mode > 2. disable bridge usage on "lan": > # uci delete network.lan.type > # uci commit > 3. reboot > 4. after reboot is completed, check whether IP address has been > assigned to eth0. > 5. ping Yes, after reboot eth0 has 192.168.1.1, but it does not ping. dmesg: [ 4.970623] init: - preinit - [ 6.462015] random: jshn: uninitialized urandom read (4 bytes read, 10 bits of entropy available) [ 6.532512] random: jshn: uninitialized urandom read (4 bytes read, 10 bits of entropy available) [ 6.748641] NPE-B: firmware's license can be found in /usr/share/doc/LICENSE.IPL [ 6.756083] NPE-B: firmware functionality 0x2, revision 0x2:1 [ 6.764113] eth0: link up, speed 100 Mb/s, full duplex [ 10.330454] jffs2: notice: (733) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 u. [ 10.348884] mount_root: switching to jffs2 overlay [ 10.401588] urandom-seed: Seeding with /etc/urandom.seed [ 10.553168] eth0: link down _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel