On 2/5/19 4:19 PM, Szabolcs Hubai wrote:
Hi Jeff,
sorry for being late in the topic, but that [1] red "status" LED is
GL-AR300M-Lite specific, and isn't suitable for the original GL-AR300M
model, IMHO.
Here are my points:
I opened my GL-AR300MD's case (a limited, dualband model), and it has
a "GL-AR300M-V1.3.1" print on it's PCB.
It has the exactly same pinouts as it could be seen on the
documentation page [2] (picture attached) and it's WLAN LED is red,
the other two, LAN and SYS (in DTS: "status") are green.
I'm unsure how are the LED colors in the other GL-AR300M sub-models.
I checked the GL.iNet site and the video of the GL-AR300M at
<https://docs.gl-inet.com/en/2/hardware/ar300m/#debrick>
published in January, 2017, shows two green and a red LED,
consistent with your description.
On the other hand, GL.iNet's source shows them as all "green"
(as is the AR300M-Lite I have in hand)
<https://github.com/gl-inet/openwrt/blob/develop/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300m.c#L49>
I'm fine with leaving the color alone or being consistent with current
production
and the OEM's definitions. Shoot, my Archer C7 v2 has "blue" LEDs under
OpenWrt.
Too bad that doesn't actually change the color of them ;)
The GPIO assignments are still in need of correction, as far as I can
tell, for all variants.
Jeff
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
