Hi, a change somewhere between 8.Feb and 10.Feb breaks the usage of the 5GHz WiFi on my Archer C7 router. I get the following entries in the log file:
Thu Feb 14 18:27:01 2019 daemon.err hostapd: Failed to set beacon parameters Thu Feb 14 18:27:01 2019 daemon.err hostapd: Interface initialization failed Thu Feb 14 18:27:01 2019 daemon.notice hostapd: wlan0: interface state DFS->DISABLED Thu Feb 14 18:27:01 2019 daemon.notice hostapd: wlan0: AP-DISABLED Thu Feb 14 18:27:01 2019 daemon.notice hostapd: wlan0: interface state DISABLED->DISABLED Thu Feb 14 18:27:01 2019 daemon.notice hostapd: wlan0-2: AP-DISABLED Thu Feb 14 18:27:01 2019 daemon.notice hostapd: wlan0-2: CTRL-EVENT-TERMINATING Thu Feb 14 18:27:01 2019 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan0-2 wasn't started Thu Feb 14 18:27:01 2019 daemon.notice hostapd: wlan0-1: AP-DISABLED Thu Feb 14 18:27:01 2019 daemon.notice hostapd: wlan0-1: CTRL-EVENT-TERMINATING Thu Feb 14 18:27:01 2019 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan0-1 wasn't started Thu Feb 14 18:27:01 2019 daemon.notice hostapd: wlan0: AP-DISABLED Thu Feb 14 18:27:01 2019 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING Thu Feb 14 18:27:01 2019 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan0 wasn't started Thu Feb 14 18:27:01 2019 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0 Thu Feb 14 18:27:01 2019 kern.info kernel: [ 162.919267] device wlan0 left promiscuous mode Thu Feb 14 18:27:01 2019 kern.info kernel: [ 162.923985] br-lan: port 2(wlan0) entered disabled state Thu Feb 14 18:27:02 2019 daemon.notice hostapd: ELOOP: remaining socket: sock=23 eloop_data=0x77f9cc40 user_data=0 handler=0x556a2d91 Thu Feb 14 18:27:02 2019 daemon.notice netifd: radio0 (2540): cat: can't open '/var/run/wifi-phy0.pid': No such file or directory Thu Feb 14 18:27:02 2019 daemon.notice netifd: radio0 (2540): WARNING (wireless_add_process): executable path /usr/sbin/hostapd does not match process path (/proc/exe) Thu Feb 14 18:27:02 2019 daemon.notice netifd: radio0 (2540): Command failed: Invalid argument Thu Feb 14 18:27:03 2019 kern.warn kernel: [ 164.791404] ath10k_pci 0000:00:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256 Thu Feb 14 18:27:03 2019 kern.info kernel: [ 164.808256] ath10k_pci 0000:00:00.0: wmi print 'P 128 V 8 T 410' Thu Feb 14 18:27:03 2019 kern.info kernel: [ 164.814618] ath10k_pci 0000:00:00.0: wmi print 'msdu-desc: 1424 sw-crypt: 0 ct-sta: 0' Thu Feb 14 18:27:03 2019 kern.info kernel: [ 164.822797] ath10k_pci 0000:00:00.0: wmi print 'alloc rem: 24616 iram: 26584' Thu Feb 14 18:27:03 2019 kern.warn kernel: [ 164.900521] ath10k_pci 0000:00:00.0: pdev param 0 not supported by firmware Thu Feb 14 18:27:03 2019 kern.info kernel: [ 164.925384] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready Thu Feb 14 18:27:04 2019 daemon.notice netifd: radio0 (2540): Cannot find device "wlan0-1" Thu Feb 14 18:27:04 2019 daemon.notice netifd: radio0 (2540): Interface 1 setup failed: IFUP_ERROR Thu Feb 14 18:27:05 2019 daemon.notice netifd: radio0 (2540): Cannot find device "wlan0-2" Thu Feb 14 18:27:05 2019 daemon.notice netifd: radio0 (2540): Interface 2 setup failed: IFUP_ERROR Thu Feb 14 18:27:05 2019 kern.info kernel: [ 166.183839] br-lan: port 2(wlan0) entered blocking state Thu Feb 14 18:27:05 2019 kern.info kernel: [ 166.189311] br-lan: port 2(wlan0) entered disabled state Thu Feb 14 18:27:05 2019 kern.info kernel: [ 166.195048] device wlan0 entered promiscuous mode Regards, Hartmut _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
