Hello, On Thursday, February 14, 2019 6:43:26 PM CET e9hack wrote: > a change somewhere between 8.Feb and 10.Feb breaks the usage of the 5GHz WiFi > on my Archer C7 router. > I get the following entries in the log file: > > Firmware is: > ath10k_pci 0000:00:00.0: firmware ver 10.1-ct-8x-__fW-022-1bbfa151 api 2 > features > wmi-10.x,has-wmi-mgmt-tx,mfp,txstatus-noack,wmi-10.x-CT,ratemask-CT,txrate-CT,get-temp-CT,tx-rc-CT,cust-stats-CT,retry-gt2-CT,txrate2-CT > crc32 66e0dff7 > > Thu Feb 14 18:27:01 2019 daemon.err hostapd: Failed to set beacon parameters > Thu Feb 14 18:27:01 2019 daemon.err hostapd: Interface initialization failed > Thu Feb 14 18:27:01 2019 daemon.notice hostapd: wlan0: interface state > DFS->DISABLED > Thu Feb 14 18:27:01 2019 daemon.notice hostapd: wlan0: AP-DISABLED > Thu Feb 14 18:27:01 2019 daemon.notice hostapd: wlan0: interface state > DISABLED->DISABLED > Thu Feb 14 18:27:01 2019 daemon.notice hostapd: wlan0-2: AP-DISABLED > Thu Feb 14 18:27:01 2019 daemon.notice hostapd: wlan0-2: > CTRL-EVENT-TERMINATING > Thu Feb 14 18:27:01 2019 daemon.err hostapd: hostapd_free_hapd_data: > Interface wlan0-2 wasn't started > Thu Feb 14 18:27:01 2019 daemon.notice hostapd: wlan0-1: AP-DISABLED > Thu Feb 14 18:27:01 2019 daemon.notice hostapd: wlan0-1: > CTRL-EVENT-TERMINATING > Thu Feb 14 18:27:01 2019 daemon.err hostapd: hostapd_free_hapd_data: > Interface wlan0-1 wasn't started > Thu Feb 14 18:27:01 2019 daemon.notice hostapd: wlan0: AP-DISABLED > Thu Feb 14 18:27:01 2019 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING > Thu Feb 14 18:27:01 2019 daemon.err hostapd: hostapd_free_hapd_data: > Interface wlan0 wasn't started > Thu Feb 14 18:27:01 2019 daemon.notice hostapd: nl80211: deinit ifname=wlan0 > disabled_11b_rates=0 > Thu Feb 14 18:27:01 2019 kern.info kernel: [ 162.919267] device wlan0 left > promiscuous mode > Thu Feb 14 18:27:01 2019 kern.info kernel: [ 162.923985] br-lan: port > 2(wlan0) entered disabled state > Thu Feb 14 18:27:02 2019 daemon.notice hostapd: ELOOP: remaining socket: > sock=23 eloop_data=0x77f9cc40 user_data=0 > handler=0x556a2d91 > Thu Feb 14 18:27:02 2019 daemon.notice netifd: radio0 (2540): cat: can't open > '/var/run/wifi-phy0.pid': No such file or > directory > Thu Feb 14 18:27:02 2019 daemon.notice netifd: radio0 (2540): WARNING > (wireless_add_process): executable path > /usr/sbin/hostapd does not match process path (/proc/exe) > Thu Feb 14 18:27:02 2019 daemon.notice netifd: radio0 (2540): Command failed: > Invalid argument > Thu Feb 14 18:27:03 2019 kern.warn kernel: [ 164.791404] ath10k_pci > 0000:00:00.0: 10.1 wmi init: vdevs: 16 peers: 127 > tid: 256 > Thu Feb 14 18:27:03 2019 kern.info kernel: [ 164.808256] ath10k_pci > 0000:00:00.0: wmi print 'P 128 V 8 T 410' > Thu Feb 14 18:27:03 2019 kern.info kernel: [ 164.814618] ath10k_pci > 0000:00:00.0: wmi print 'msdu-desc: 1424 sw-crypt: > 0 ct-sta: 0' > Thu Feb 14 18:27:03 2019 kern.info kernel: [ 164.822797] ath10k_pci > 0000:00:00.0: wmi print 'alloc rem: 24616 iram: 26584'
> Thu Feb 14 18:27:03 2019 kern.warn kernel: [ 164.900521] ath10k_pci > 0000:00:00.0: pdev param 0 not supported by firmware > Thu Feb 14 18:27:03 2019 kern.info kernel: [ 164.925384] IPv6: > ADDRCONF(NETDEV_UP): wlan0: link is not ready > Thu Feb 14 18:27:04 2019 daemon.notice netifd: radio0 (2540): Cannot find > device "wlan0-1" > Thu Feb 14 18:27:04 2019 daemon.notice netifd: radio0 (2540): Interface 1 > setup failed: IFUP_ERROR > Thu Feb 14 18:27:05 2019 daemon.notice netifd: radio0 (2540): Cannot find > device "wlan0-2" > Thu Feb 14 18:27:05 2019 daemon.notice netifd: radio0 (2540): Interface 2 > setup failed: IFUP_ERROR > Thu Feb 14 18:27:05 2019 kern.info kernel: [ 166.183839] br-lan: port > 2(wlan0) entered blocking state > Thu Feb 14 18:27:05 2019 kern.info kernel: [ 166.189311] br-lan: port > 2(wlan0) entered disabled state > Thu Feb 14 18:27:05 2019 kern.info kernel: [ 166.195048] device wlan0 > entered promiscuous mode "between 8.Feb and 10.Feb" https://github.com/openwrt/openwrt/commits/master/package/kernel/ath10k-ct so maybe it was: https://github.com/openwrt/openwrt/commit/835fc08ae3fb9e27db0f095a10fbff24f87ee1a9 (Although, github says it was commited on the 11th) Can you please post your /etc/config/wireless and try to revert the patch to test if this helps with the situation? If it is indeed the patch (and not a unsupported configuration): @Ben can you please take a peek into your wave-1 firmware and check if the mgmt_rate WMI (WMI_10X_VDEV_PARAM_MGMT_RATE) is supported, or if there is a bad interaction somewhere else? (This "pdev param 0 not supported by firmware" was mentioned in https://bugs.openwrt.org/index.php?do=details&task_id=1920 so probably not the problem) Cheers, Christian _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
